1.0 Introduction This document covers the basic setup of an NXT Mercury Powered (NXT-MSC) controller in Doors.NET or Borealis. It assumes your Doors.NET or Borealis system has already been setup. Important Notes: A Doors.NET system should be licensed ...
1.0 NXT-MSC Controller Encryption Introduction The ability to encrypt the communications path is needed when that path includes a network that is shared and carries other data. In the case of a serial connection, physical access to the communication ...
1.0 Introduction There may be a situation, where it is not possible to gain access to the Doors.NET client PC/or the system administrator account during system configuration. If you need to configure an NXT-MSC controller this can be done using ...
How do I setup an NXT-MSC 2-door or 4-door controller in the Doors.NET software? An NXT Mercury-powered (NXT-MSC) controller is added to Doors.NET via an Ethernet connection and there are two options; either the controller obtains its IP address ...
Q. How Do I Update the NXT-MSC Controller Firmware Using the Doors.NET Software? A. The following video explains how to update the firmware on an NXT-MSC 2 or 4-door controller: