CSA Certificate for NXT RIM Modules

CSA Certificate for NXT RIM Modules

    • Related Articles

    • NXT RIM-WI-PLUS Module Installation Guide

      1.0 Introduction This guide explains how to install and configure the NXT Wiegand-Only Plus Reader Interface Module which is a permanent replacement for the WI (Wiegand-Only) module. The module connects directly onto one of the communication buses of ...
    • NXT Reader Interface Module Specifications

      Specifications  Size  • When mounted on the NXT Controller - 6.50 inches high by 5.50 inches wide by 2.50 inches deep, not including wiring connectors - 16.51 cm by 13.97 cm by 6.35 cm 2.2 Power/Current Requirements • 10 to 14 VDC @ 100 mA (maximum ...
    • NXT-RM3 Module - Installation Guide

      1.0 Wiring and Layout Diagrams 1.1 Reader Interface Module (RIM) Diagram Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide ...
    • NXT-6RK to RIM Wiring and Configuration Drawing

    • NXT WI Plus Data Sheet

      Attached.