Assign Access Groups in Visual Doors

Assign Access Groups in Visual Doors

1.0 Assign an Access Group

  1. From the home screen, click the Cardholders tile.

    Cardholders Tile

  2. You will see all the cardholders listed on the left.
  3. Select a cardholder you wish to edit.

    Select Cardholder

  4. The cardholder record will appear on the right.
  5. Locate and click on the Access Rights tab located above the cardholder record.

    Access Rights Tab

  6. Place check marks against the access group you wish to assign to the cardholder.

    Assign a Group

  7. The updated cardholder information will be sent out to the access control network immediately.

 

2.0 Unassign Access Groups

Un-assigning an access group is very simply a case of de-selecting/removing the check-mark from the access group selection. Again, this information will be updated immediately and there is no need to perform any kind of update.

 

3.0 Assigning Multiple Access Groups

When using NXT and NXT-MSC controllers you have the option of assigning multiple access groups to cardholders.