Assign an Access Group to a Cardholder
1.0 Introduction
Once access groups have been setup they can be assigned to cardholders.
2.0 Access Group Assignment Limitations
- For NXT controllers there is a maximum of 8 access groups per cardholder.
- For Neutron controllers there is a maximum of 8 access groups per cardholder.
- For PXL controllers there is a maximum of 1 access group per cardholder, apart from the following circumstances:
- all controllers and readers are added to separate groups.
- the controller does not have doors existing in different access groups.
- a controller is not listed in more than one group. - For NXT-MSC controllers there is a maximum of 32 access groups per cardholder.
- For Mercury SCP controllers there is a maximum of 32 access groups per cardholder.
3.0 Assigning Access Groups to Cardholders
- Go to Home >> Cardholders to display the cardholder list.
- Double-click a cardholder name or locate a cardholder using the Search facility.
- The cardholder record will open on the General tab.
- To assign an access group, click on the Access Rights tab.
- You will see a list of all the access groups on the system.
- Place a check mark against the access group(s) you wish to assign.
- Save the settings using one of the save icons in the upper left corner.
- The settings will be sent out to the access control network immediately. There is no need to perform any kind of manual download or update.
Related Articles
Cardholder Access Rights
The Access Rights page displays a list of all the access groups that have been defined on the system. Access Groups consist of the readers on the system, along with the associated time schedules. Once access groups have been added to the system they ...Temporarily Disable Cardholder Access
1.0 Introduction To provide added flexibility, there are several methods available in Doors.NET for disabling card access or for preventing doors from automatically unlocking - such as for extended periods of un-occupancy or limited occupancy at a ...Cardholder Editing
1.0 Introduction The Cardholder Edit Form allows you to perform cardholder enrollment and information management. This is a multi-step process: Create the Cardholder Record Enroll Credentials to the Cardholder Enter Activation Dates (if applicable) ...Cardholder Templates
1.0 Introduction The Doors.NET system uses the concept of of templates to facilitate repetitive data entry when creating a new cardholder record. These templates can be changed to suit your preferences. For example, a template can be assigned a ...Design Mode - Cardholder Templates
1.0 Introduction You can use Cardholder Templates and Design Mode to automatically assign the same access group/groups to all block enrolled cards, to assign them with the save company contact information, set certain Advanced cardholders settings or ...