BioManager Database Restore

BioManager Database Restore

Restore the BioManager Database

Once you have installed the latest version of BioManager software (onto the new PC) you are ready to restore the database.

 

  1. Plug the backup thumb drive or other storage device into an available USB port
  2. Double-click the BioManager Client icon located on the desktop.



  3. You will automatically be logged into the client.
  4. From the Backup menu, select the Restore option.



  5. Navigate to the USB storage device and select your backup file.



  6. Click the OPEN button.
  7. You will see the following message.



  8. The database will be restored and you will be disconnected from the BioManager local server.
  9. From the top right corner of the client, click on Connect To.
  10. Select Local.



  11. You should then see the client populate with the database information.

 

Note: If it seems as though the Users are missing from your system then you will need to clear the local cache file.

- Click on Settings >> Servers.
- Click the button named Clear local cache.



- Close the Server Settings window.

- You should then Disconnect and reconnect to the local BioManager Server (via the icons in the top-right of the client).

 



- Your database information should then be displayed correctly.

 

    • Related Articles

    • BioSync - BioManager Database Backup

      The BioManager should be backup on a regular basis (especially if there are changes being made frequently. A full backup of users, settings and BioSync hardware can be made very quickly). You would use the database backup and restore procedure if you ...

    • BioSync - Migrate the BioManager Software

      Perform the following steps to migrate the BioManager installation: 1. Create backup file (menu backup). 2. Using ServerSetup remove service. 3. Install at new PC. 4. Restore backup. Also moving the database folder can do the job, just do not forget ...

    • BioSync - Using the BioManager Software

      1.0 Introduction BioManager software is client-server based software. The server is installed only on one PC (together with the client) and the client can be installed on other PCs (without the server). If you are using the client from a remote PC ...

    • BioManager Software Upgrade

      1.0 Introduction The following steps explain how to upgrade to a new version of BioManager software. At the time of writing, the current software version is v2.0.0 Notes: To download the new version of BioManager you must have registered an account ...

    • BioManager Software Download and Installation

      1.0 Introduction The BioManager Software is used to communicate to the BioSync fingerprint readers. Once you have connected to the BioSync devices you can configure them, add users, credentials and fingerprints and run basic diagnostic checks. 2.0 ...