BioSync - BioManager Database Backup

BioSync - BioManager Database Backup

The BioManager should be backup on a regular basis (especially if there are changes being made frequently. A full backup of users, settings and BioSync hardware can be made very quickly). You would use the database backup and restore procedure if you wish to deploy the BioManager software on a different PC/workstation.

 

Backup the Database

  1. From the Backup menu select Create Backup.

    Create Backup

  2. Click YES to the prompt.
  3. Window File Explorer will open allowing you to specify a destination directory for your backup file (typically this would be an external drive or a USB thumb-drive.
  4. Click the SAVE button to save the backup file.

    Select Destination

  5. You now have a copy of your entire BioManager database.

    • Related Articles

    • BioSync - Migrate the BioManager Software

      Perform the following steps to migrate the BioManager installation: 1. Create backup file (menu backup). 2. Using ServerSetup remove service. 3. Install at new PC. 4. Restore backup. Also moving the database folder can do the job, just do not forget ...

    • BioSync - Using the BioManager Software

      1.0 Introduction BioManager software is Client-Server based software. The server is installed only on 1 PC (together with the client) and the client can be installed on other PCs (without the server). If you are using the client from a remote PC and ...

    • BioSync - How to Install the BioManager Software

      The BioManager Software is used to communicate to the BioSync fingerprint readers. Once you have connected to the BioSync devices you can configure them, add users, credentials and fingerprints and run basic diagnostic checks. Installation Procedure ...

    • BioManager Software Upgrade

      1.0 Introduction The following steps explain how to upgrade to a new version of BioManager software. At the time of writing, the current software version is v2.0.0 Notes: To download the new version of BioManager you must have registered an account ...

    • BioManager Software Download and Installation

      1.0 Introduction The BioManager Software is used to communicate to the BioSync fingerprint readers. Once you have connected to the BioSync devices you can configure them, add users, credentials and fingerprints and run basic diagnostic checks. 2.0 ...