Capture Locks in the Allegion ENGAGE App

Capture Locks in the Allegion ENGAGE App

To manage your locks in the Keri Web Portal and mobile app you should now use the Allegion ENGAGE app to capture the locks.

 

Note: If you are adding multiple locks of the same type and within close range, it is advisable that you know the serial number for each lock. The serial number in printed on a white label and stuck to a new lock. Do NOT throw away this white label until you have completely setup and commissioned the lock.

  1. Log in to the ENGAGE app.
  2. The app will open and the devices screen will appear.

    Note: You can click the menu icon >> Sites to check the site is displaying.

  3. On the Devices screen, tap the add (+) icon - you will see a list of all device types that can be added.

    Select Device

  4. Select either a Control lock, NDE lock or an LE lock.
  5. Select to use the default settings for the lock.
  6. The app will search for any locks within range (of the lock type selected).
  7. When detected, the lock(s) serial number(s) will also be displayed).
  8. Tap on the lock and the app will connect to it.
  9. Verify that the reader's LED is blinking red >> click YES.
  10. Enter a name for the lock >> click NEXT.
  11. The lock will be added and will be displayed on the Device screen.
  12. Repeat steps 3-9 for any additional locks you need to add.

    Note: You should skip the step to setup Wi-Fi on the lock.

 

 

Next >> Capture the MT20W in the ENGAGE App.

    • Related Articles

    • Capture the Locks in the ENGAGE App

      To manage your locks in the Confluence Web Portal and mobile app you should now use the Allegion ENGAGE app to capture the locks. Note: If you are adding multiple locks of the same type and within close range, it is advisable that you know the serial ...

    • Capture the MT20W Reader in the ENGAGE App

      The following document explains how to capture the MT20W USB enrollment reader using the ENGAGE app. Important Notes: - The MT20W will only connect to a 2.4GHz Wi-Fi network. It is not compatible with 5.0 GHz networks. Your router must therefore have ...

    • Download and Install the Allegion ENGAGE App

      Download and Install the Allegion ENGAGE App Go to the Google Play Store on your supported Android device or the APP Store on your iOS device. Search for 'Allegion ENGAGE'. Tap the INSTALL button to download. Then tap OPEN to open the app. An ENGAGE ...

    • Allegion ENGAGE Password Reset

      ENGAGE Password Reset IMPORTANT NOTE: If you need to reset your ENGAGE password this can ONLY be done using the ENGAGE app. On your phone or smart device, open the ENGAGE app. Click on the Forgot Password link (located beneath the LOG IN button). ...

    • Allegion No Tour - Full Reference

      1.0 Introduction Allegion No Tour is supported with the Allegion Schlage® Control Smart Locks, NDE or LE Series locks. The No Tour solution allows you to manage your site and its users from virtually anywhere with Keri's Confluence cloud-based app ...