Cardholders Advanced Settings

Cardholders Advanced Settings

The Advanced options tab contains additional options for each cardholder record. These are options are not required for basic operation of the cardholders in the system.

 
   Cardholders Advanced Tab

 

The Exempt from APB checkbox instructs the controller(s) to ignore Anti-passback rules for all card numbers assigned to the selected cardholder. Regardless of the

Anti-Passback configuration of the readers. Cardholders with this selection checked can use any reader as though Anti-passback were not enabled.

 

The Use ADA/DDA Timing checkbox instructs the controller(s) to give additional time on the door strike and held-open times for this cardholder. Those times are specified per reader and may be different for each reader.

 

The PIN Exempt checkbox, when checked, instructs the controller(s) to disregard the PIN requirement for this cardholder when readers are set to Card and PIN mode.

 

The Change Use Count checkbox, when checked, and when use counts are enabled on the controller(s) instructs the controller to keep a count of the number of times this cardholder has gained access at the controller's readers.

 

The Vacation Settings selections are used to designate a date range for the cardholder to be on vacation. During the specified date range, the cardholder's credential(s) will automatically be disabled. The vacation period begins at 00:00:00 on the Start Date and ends at 23:59:59 on the End Date. This setting is only supported when using Mercury or Mercury-Powered hardware.


The Temporary Upgrade Settings is a feature that is schedule for a future release of Doors.NET (so is currently disabled). Once implemented, the feature will allow you to temporarily change the cardholder's assigned access rights. After the end date, of the temporary upgrade, the cardholder will revert back to using its normal assigned access rights.

    • Related Articles

    • Rollcall Client - Advanced

      1.0 Introduction Advanced Rollcall is an option that can be enabled on your license. The main benefit of Rollcall Advanced is you have the option of adding muster readers and you also have the ability to automatically print area occupancy lists. An ...

    • Advanced Situation Manager

      1.0 Introduction Advanced Situation Manager is an extension of the Global Lock and Global Unlock features that are available. You can not only use the Situation Manager for unlocking and locking doors but you can create different system behavior for ...

    • Advanced Situation Manager Setup Guide

      1.0 Introduction Advanced Situation Manager is an extension of the Global Lock and Global Unlock features that are available. You can not only use the Situation Manager for unlocking and locking doors but you can create different system behavior for ...

    • Enable Advanced View

      Advanced View is not enabled by default on a standard Doors.NET installation, even for the default System Administrator. If you highlight a controller in the hardware tree and can only see limited properties/settings then you will need to enable ...

    • Event Management and Event Settings

      Effective from Doors.NET v_3.5.1.22, historical event information is automatically deleted on a First-In-First-Out (FIFO) basis. Prior to this version, historical event information would be automatically transferred to separate archive databases, but ...