EG ONE - Change the Unlock Password (Obsolete)

EG ONE - Change the Unlock Password (Obsolete)

By default you are required to enter a 4-digit password before you can unlock the door. The default unlock password is 1111, but we advise changing it as soon as possible:

  1. From the device home screen, swipe-left then press the edit icon.
  2. Press Advanced Settings.
  3. Select Modify Unlock Password.
  4. Enter the existing unlock password (default - 1111).
  5. Enter a new unlock password.
  6. Confirm entry of the new unlock password.

    • Related Articles

    • EG ONE Setup and User Guide (Obsolete)

      Standalone document attached.

    • D-Lite User Manual (Obsolete)

      IMPORTANT NOTE: D-Lite software is obsolete as it is specifically tied to a long out-of-date OS. It can be used on an old PC with a supported OS but there is no tech support available from Keri Systems - (just the attached user guide).

    • EG ONE - Change the Unit Password (Obsolete)

      The default password for the Entraguard ONE/ONE+ is 1234 so Keri recommends that you change the default password as soon as possible (after adding the device to your app). From the device home screen, swipe left, then press the edit icon. Press ...

    • EG ONE - Enable One-Key Unlock (Obsolete)

      The One-Key Unlock feature gives you the less-secure option of unlocking the door immediately following a single press of the unlock icon. By default you are required to enter an unlock password (default is 1111). From the device home screen, swipe ...

    • EG ONE/EG ONE+ Data Sheet (Obsolete)

      Standalone document attached