Connecting a Fail-Secure Lock

Connecting a Fail-Secure Lock

Wiring a fail-secure lock to the TB3 terminal block of the PXL controller

​


    • Related Articles

    • Connecting a Fail-Safe Lock

      Wiring a fail-safe lock to the TB3 terminal block of the PXL controller

    • Connecting an Alarm Output Relay

      Connecting an Alarm Output Relay Alarm Output Relay Connections

    • PXL-500P MS Reader Connecting

      Connecting a Keri Systems Proximity Reader to a PXL-500P/PXL-510P • The "A" reader is wired to TB5. • The "B" reader is wired to TB6.

    • PXL-500W Wiegand Reader Connecting

      The PXL-500W controller can be configured to accept input from single-line LED, dual-line LED, and Essex keypad Wiegand input devices (through the Doors.NET™ software).   Note: The Wiegand Reader must transfer data according to the Security Industry ...

    • Connecting a General Purpose Input

      The general-purpose input is used in conjunction with the programmable input/output feature of the Doors access control software. There are three possible uses for the general-purpose input. • the primary controller (#1) may be figured for either ...