1.0 Introduction

The site determines which hardware type will be used. Once a site has been added you will then be able to add a hub (or multiple hubs) to the site.

A site may represent a business location, a floor of a building or any other grouping of hardware. The requirements for a site are as follows:

Notes:

• You will need to use multiple hubs if you wish to use different hardware/controller types (for example: Standard NXT AND NXT-Mercury-Powered (MSC) controllers.
• A site must have a world time zone assigned (all controllers on the site will use this world time zone).
• Each site will need a minimum of one physical hub.
• Each hub supports up to 32 doors.

The following steps explain how to create a Standard NXT site - which can also be used by Keri KB controllers.

2.0 Site Setup Steps

1. Log into the Borealis web portal at: keri.aetheros.net
2. On the left-side of the screen, click on Sites.
3. The Sites screen will open.
4. Click the CREATE button located on the right.
   
   
   
   
5. A new create site form will appear.
   
   
   
   
6. Enter a name for the new site.
7. Enter a contact name for the site.
8. Enter a contact phone number for the site.
9. Select the Keri Standard NXT and Keri Borealis KB Controller type.
   
   
   
   
10. Select the country where the site is located.
11. Select a state (where applicable).
12. Select the world time zone to apply to the site.
13. Select to enable keypads on the site (if the site uses readers that have keypads).
    
    
    
    
14. Click the submit button.
15. At the top of the screen, you will see a message that the site has been successfully created.