Create a New Site

Create a New Site

1.0 Introduction

Typically defined as a subnet. Each site requires a hub that will be configured for the hardware type installed at the site. A hub is limited to 32 doors per controller type.



  • The site defines the hardware type to be used.

  • Every system needs at least one site.

  • The hub is claimed and assigned to the site.

  • Multiple hubs can be assigned to the same site (if more than 32 doors are on the system).

  • If adding multiple hubs to the same site they must be of the same hardware type.

  • Multiple sites (and multiple hubs) must be used if controllers will be located in different geographical timezones.

2.0 Site Setup Steps

  1. Log into the Borealis web portal at: keri.aetheros.net.
  2. On the left-side of the screen, click on Sites.
  3. The Sites screen will open.
  4. Click the CREATE button located on the right.


    Site Create Button
  5. A new create site form will appear.



  6. Enter a name for the new site.
  7. Enter a contact name for the site.
  8. Enter a contact phone number for the site.
  9. Select the hardware type that will be used.
  10. Select the country where the site is located.
  11. Select a state (where applicable).
  12. Select the world time zone to apply to the site.
  13. Select to enable keypads on the site (if the site uses readers that have keypads).



  14. Click the submit button.
  15. At the top of the screen, you will see a message that the site has been successfully created.







Create a Site and Claim a Hub 


    • Related Articles

    • Create a KB Site

      1.0 Introduction The following section explains how to add a KB site to Borealis. Once the KB site has been added you will then be able to add a claim a hub. When the hub is associated with a KB site it will automatically be configured to work with ...
    • Create a Standard NXT Site

      1.0 Introduction The site determines which hardware type will be used. Once a site has been added you will then be able to add a hub (or multiple hubs) to the site. A site may represent a business location, a floor of a building or any other grouping ...
    • Create a New System

      1.0 Introduction Every Borealis installation will require a ‘System’ to initially be added. The system is created and authorized by Keri Systems and you will be added to the system as an operator with full administration rights. Note: Before creating ...
    • Add a PXL Site

      1.0 Introduction The following section explains how to add a PXL site to Borealis. Once the PXL site has been added you will then be able to add a claim a hub. When the hub is associated with a PXL site it will then automatically be configured to ...
    • Add a True Mercury Site

      1.0 Introduction The site determines which hardware type will be used. Once a site has been added you will then be able to add a hub (or multiple hubs) to the site. Each hub supports up to 32 doors. A site may represent a business location, a floor ...