Doors.NET and Allegion Lock Integration Overview

Doors.NET and Allegion Lock Integration Overview

Doors.NET and Allegion Lock Integration

Allegion AD, NDE and LE Series locks seamlessly integrate with Keri Doors.Net to provide a cost effective and scalable access control solution to meet your security needs.

The integration allows real-time monitoring, audit trails, centralized unlock, lock and lockdown. Plus instant cardholder access control management.

The Allegion locks support a wide range of credential options including PIN, magnetic stripe, proximity (125 kHz) and Smart (13.56 MHz) credentials; card + PIN readers are available for extra security.

These locks are cost-effective to install, scalable and combine the components typically found near to an access control point; such as the electronic lock, a proximity reader, door position sensor, request to exit switch, tamper switch and more.

Note: Integration with Doors.NET requires the use of NXT Mercury-Powered 2 or 4-door controllers.

 

Allegion AD-Series Locks

AD Series Locks

 

The AD series locks are available as both hardwired (AD-300) and wireless (AD-400) options. The AD Series locks are designed to be modular, they can easily be upgraded in the future to meet your changing security and technology requirements.

 

AD-300 Lock Summary

 

AD400 Locks


Note: Proximity card (PR, PRK) ONLY and Smart card (SM, SMK) ONLY readers have been discontinued and replaced by the Multi-Tech (MT, MTK) readers that provide all the same functionality as the original Proximity and Smart card readers in a single credential reader.

Both AD-Series lock types have a number of features built in that are configurable in the field and there are a long list of items that can be monitored via the software and used as trigger events for the optional Local Linkage module. Both locks can also be used with or without hard-wired Keri controller-managed doors on the same system, providing you with optimum deployment flexibility.

AD-Series locks can be used in locations where it would be difficult or cost-prohibitive to install a wired lock and provides a standard set of access control features. Schlage AD-Series wireless locks seamlessly integrate with Doors.NET and NXT-MSC (Mercury Powered) controllers with up to 16 locks wired to each controller.

 

Allegion ENGAGE NDE and LE Series Locks

 

NDE and LE Locks

Schlage® NDE or LE locks with ENGAGE™ technology seamlessly integrate with Keri Doors.Net to provide a cost effective and scalable access control solution to meet your security needs. The SchlageNDE/LE wireless locks with ENGAGE technology are designed to be easy to install, connect, manage and use. Developed specifically for facilities that want to upgrade to electronic credentials for improved security and efficiency, it is ideal for interior office doors, common area doors and sensitive storage spaces.

Simplified installation – Schlage wireless locks combine the locking device, credential reader, battery power, and access control sensors into one integrated unit that can be easily installed in minutes versus hours.

Less disruption – Schlage wireless locks eliminate the need to run wires to each opening which is extremely beneficial with concrete construction, solid ceilings, and remote locations.

Flexible connectivity options - Schlage wireless locks are designed to fit existing infrastructure and can be managed inside or outside of your IT network. Options include RS-485, IP, Wi-Fi, and No-Tour.

Easy to manage – The wireless locks are managed with an ENGAGE™ cloud-based web and mobile apps then they can be quickly and easily added to your Doors.NET system.

 

NDE Locks

 

LE Lock Summary

 

Allegion No Tour

The Allegion No Tour integrated security solution is supported with the Allegion Schlage® Control Smart Locks, NDE or LE Series locks. The No Tour solution allows you to manage your site and its users from virtually anywhere with the Aetheros cloud-based app and eliminates the need to physically visit the app after enrolling new cardholders.

 

System Capacities

  • Up to 16 AD locks per controller bus (allowing up to 64 doors can be controlled with a 4-door controller or up to 32 doors with a 2-door controller).
  • When using the AD-400 locks there is a maximum of 1 x PIM module per bus.
  • With the NDE or LE locks, there is a maximum limit of 10 locks per bus (up to 40 doors with a 4-door controller or 20 doors with a 2-door controller).
  • When using the NDE or LE locks there is a maximum of 1 x gateway per bus.

    • Related Articles

    • Allegion NDE and LE Lock Integration - Quick Start Guide

      1.0 Introduction This quick start guide walks you through the process of setting up the Doors.NET integration between the Allegion Gateway and the Allegion NDE and LE locks. It assumes you have an existing Allegion ENGAGE 'Third-Party' account type ...
    • Allegion and Keri Integration Data Sheet

      Allegion and Keri Integration Data Sheet (attached).
    • Allegion NDE and LE Lock Integration - Full Reference Guide

      1.0 Introduction Keri can integrate with the Allegion LE and NDE wireless locks using Schlage Control™ technology. Installation and lock configuration is extremely simple and easy using the Allegion ENGAGE app and the setup in the Doors.NET software ...
    • Allegion Lock Operating Modes

      Doors.NET software integrates seamlessly with the Allegion AD-series, NDE and LE series of wireless locks. The Allegion LE/NDE Series of locks support several different operating modes that can be accessed via a right-click on the reader: Select Mode ...
    • Allegion No Tour - with Visual Doors

      1.0 Introduction This document explains how to use the Allegion No Tour feature in Visual Doors. Credentials are enrolled and updated using the MT20W USB enrollment reader. Following enrollment, the access rights information is written to the card ...