Doors.NET - Add an NXT-MSC Controller using a Static IP Address

Doors.NET - Add an NXT-MSC Controller using a Static IP Address

This video explains how to add the NXT-MSC controller to the Doors.NET software via no-DHCP address assignment.





    • Related Articles

    • Doors.NET - Add an NXT-MSC Controller Using DHCP

      This video explains how to add the NXT-MSC controller to the Doors.NET software using DHCP address assignment. ​
    • Setup an NXT-MSC Controller

      1.0 Introduction Doors.NET installation and configuration is a three step process. Each of these steps is covered separately in the help file and there are also separate standalone documents available: Doors.NET Software Installation (document P/N: ...
    • Doors.NET - Add a Standard NXT Controller Using Auto-Config

      This video explains how to use auto-config to add a standard NXT controller to Doors.NET. ​
    • Doors.NET - Port Forwarding

      1.0 Introduction One method of connecting to controllers over the Internet is to use Port Forwarding on the router that the controller is connected to. Note: The controller's router needs to be set to a static IP address (a public, external IP ...
    • Doors.NET - Controller Properties

      This video explains how to edit and the NXT and NXT-MSC controller properties when using the Doors.NET software.