Doors.NET - Cardholders Block Enrollment

Doors.NET - Cardholders Block Enrollment

This video explains how to enroll a block of Keri NXT, Keri MS or 26-bit Wiegand format credentials:


    • Related Articles

    • Cardholder Enrollment - Block Enrollment

      Introduction Block Enrollment allows an Operator to create a generic set of credentials (using consecutive credential numbers) that can be, in turn, issued on an as-needed basis. Enable the Advanced View feature set to perform Block Enrollment. If ...
    • Cardholder Enrollment - USB Enrollment Reader

      USB Enrollment Reader Enrollment 1.0 Introduction Keri Part Number - RDR-ENR1 The RDR-EN1 is a multi-technology USB enrollment reader that is capable of reading both 125KHz proximity cards and 13.56MHz contactless cards and is compatible with the ...
    • Cardholder Enrollment - Presentation Enrollment

      1.0 Introduction The Doors.NET software offers presentation enrollment functionality from any reader on the system. Presentation enrollment allows you to enroll a card simply by presenting the card at the reader. The imprint, facility code (where ...
    • Doors.NET - Quick Start Guide

      1.0 Introduction This document covers the basic installation and configuration of Doors.NET with Standard NXT, PXL, Entraguard, NXT-MSC (Mercury-Powered) or True Mercury controller types. It assumes that the computer being used for the Doors.NET ...
    • Doors.NET - End Users Guide

       Doors.NET End Users Guide (attached)