Doors.NET - Cardholders Manual Enrollment

Doors.NET - Cardholders Manual Enrollment

This video explains how to manually enrol cardholders into the Doors.NET software.

    • Related Articles

    • Cardholder Enrollment - Manual Enrollment

      Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
    • Cardholder Enrollment - USB Enrollment Reader

      USB Enrollment Reader Enrollment   1.0 Introduction  Keri Part Number - RDR-ENR1 The RF Ideas pcProx Plus is a cutting edge USB enrollment reader that is capable of reading both 125KHz proximity cards and 13.56MHz contactless cards and is fully ...
    • Doors.NET - MS Series Card Enrollment

      This video explains how to enrol Keri MS series credentials into the Doors.NET software. It covers manual enrolment, block enrolment and presentation enrolment (using one of the readers on the system).
    • Doors.NET - Cardholders Block Enrollment

      This video explains how to enroll a block of Keri NXT, Keri MS or 26-bit Wiegand format credentials:
    • Doors.NET - Quick Start Guide

      This document covers the basic installation and configuration of Doors.NET with Standard NXT, PXL or NXT Mercury-Powered controller types. It assumes that the computer being used for the Doors.NET installation has a connection to the Internet and ...