Doors.NET - Create and Edit Access Groups

Doors.NET - Create and Edit Access Groups

This video explains how to create and edit access groups in the Doors.NET software.


    • Related Articles

    • Edit Access Groups

      1.0 Introduction Any alterations to existing access groups can be made very quickly and easily on the access groups page. Notes: It is not possible to adjust an assigned time schedule for a reader. You must remove the reader and the schedule and then ...
    • Setup Access Groups

      Access Group Setup in Doors.NET 1.0 Introduction Access groups are setup in Doors.NET via Home >> Access Groups. There are two default access groups; Never and Total Access. When a controller is added to the system it's doors are automatically added ...
    • Doors.NET - End Users Guide

       Doors.NET End Users Guide (attached)
    • Doors.NET - End User's Guide

      Doors.NET user guide for the end-users (attached).
    • Setup Elevator Control Access Groups

      1.0 Introduction When using Elevator Control with MSC or SCP hardware you have to setup Elevator Access Groups. These are then assigned to a general access group which can then be assigned to a cardholder. 2.0 Create and Assign Elevator Access Groups ...