This video explains how to enrol Keri MS series credentials into the Doors.NET software. It covers manual enrolment, block enrolment and presentation enrolment (using one of the readers on the system).
Presentation Enrollment in Doors.NET 1.0 Introduction The Doors.NET software offers presentation enrollment functionality from any reader on the system. Presentation enrollment allows you to enroll a card simply by presenting the card at the reader. ...
Block Enrollment in Doors.NET 1.0 Introduction Block Enrollment allows an Operator to create a generic set of credentials (using consecutive credential numbers) that can be, in turn, issued on an as-needed basis. Enable the Advanced View feature set ...
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
1.0 Introduction Welcome to the Doors.NET full manual. This comprehensive document covers everything you would need to know to setup and use a standard Doors.NET access control system and the NXT-MSC controller types. The document consists of ...
USB Enrollment Reader Enrollment 1.0 Introduction Keri Part Number - RDR-ENR1 The ENR-1 is a simple and efficient USB enrollment reader . It has a small form factor and is capable of reading a multitude of 125KHz proximity cards and 13.56MHz ...