Beginning with v4.0.1 Doors.NET software IS NOT COMPATIBLE with the following Windows operating systems:

• Windows Server 2008 and 2008 R2
• Windows Server 2003
• Windows XP
• Windows Vista
• Windows 7
• Windows 8
• Windows RT

(The last supported Doors.NET version for the above operating systems is 3.5.1.22 (SP1)).

Doors.NET software IS COMPATIBLE with:

(both 32-bit and 64-bit where applicable)

• Windows 8.1
• Windows 10 - including the Home version
• Windows Server 2012 and 2012 R2
• Windows Server 2016

All of these operating systems support Microsoft .NET Framework v4.6.2.

If SQL is ALREADY on your computer:

• The Doors.NET installer will poll the host computer and use the SQL version that is already installed. This is true for both new Doors.NET installations and for Doors.NET upgrades.

For new Doors.NET installations on computers WITHOUT SQL installed:

64-bit computers:

• If SQL server is not present, then SQL Server 2016 Express will be installed.

32-bit computers:

• The Doors.NET installer will install clients and gateways, but WILL NOT INSTALL SQL. You will have to manually install the SQL revision appropriate for your operating system.
• Keri recommends installing SQL Server 2014 (the last SQL Server supporting 32-bit computers).
  
  SQL Server versions 2008 and 2012 are also compatible.

The following link will take you to Microsoft's SQL Server Express 2014 download page:

https://www.microsoft.com/en-us/download/details.aspx?id=42299

Notes:

• SQL 2005 will NOT install on operating systems Windows 8 and higher.
• SQL 2016 will NOT install on any 32-bit computer starting with Windows 7 and higher.
• A Windows 7 OS can support SQL 2005 (the last Windows operating system able to do so).

In Doors.NET for All Products

• Doors.NET has been upgraded to support Microsoft's .NET 4.6.2 Framework software. This allows Doors.NET to take advantage of improvements and new features Microsoft has made to the .NET framework software and to the development tools in support of the .NET framework software.

Specific to PXL-LC Controllers

• An identification code correction has been made for PXL-LC (Elevator Control) controllers that prevented a second door from being recognized when a Satellite Board was added.

Specific to Entraguard Controllers

• Corrected an issue involving Entraguard database upgrades from Doors32 to Doors.NET that would result in an incorrect database configuration when the upgrade involved Entraguard installations where the customer is using only Entraguard IDs (no physical cardholders).

With Doors.NET Software Installation:

• Doors.NET installation may fail if a Windows Update is in progress or a computer (due to a Windows Update) is pending. Please make sure all Windows Updates have been completed prior to installing Doors.NET.

For NXT Controllers and Peripherals:

• Standard NXT Controllers - 2.05.68
• NXT Readers - 4.00.03
• Standard Reader Interface Modules (RIMs) - 3.03.21
• Wiegand-Only Reader Interface Modules (RIMs)
• 3.03.21 provides single-line LED support for Wiegand-Only RIMs
• 3.03.10 provides dual-line LED support for Wiegand-Only RIMs
• 4x4 I/O Modules - 3.00.03
• GIOX Motherboard - 1.00.21
• GIOX Input Module - 1.00.10
• GIOX Output Module - 1.00.10

For PXL:

• Standard PXL Controllers - 8.6.09
• Legacy PXL Controllers - 8.5.22 (requires a Legacy license for operation - minimum allowable firmware revision is 8.4.49)
  
  

For Entraguard:

• Standard Titanium and Silver - 7.8.02
• Legacy Titanium and Silver - 7.6.13 (requires a Legacy license for operation)
• Standard Platinum - 9.2.02
• Legacy Platinum - 9.1.09 (requires a Legacy license for operation)

For Mercury Powered NXT Controllers:

• MSC controllers - 1.235

Firmware Upgrades

NXT MSC FW - 1.235

• Corrected an issue with controllers in networks with unusually high traffic. A Mercury Powered NXT controller may receive too many network overrun errors, resulting in that controller temporarily removing itself from the network. Under certain conditions, that controller may not return to the network, requiring power cycling the controller to bring it back online.

Translations

Completed Translations:

• Polish
• Russian
• Slovenian
• Spanish (Castilian)
• Turkish

Translations* Pending Updates:

• Arabic (UAE)
• Chinese (Simplified)
• Chinese (Traditional/Taiwan)
• French (France)

* These translation file sets are not yet complete pending submissions from our translators. If you use these translations you will find mislabelled and/or non-translated ribbon and menu fields in some sections of the program. Non-translated fields will be displayed in US English.