Doors32™ in a Network Environment

• Related Articles

• Doors32™ - PXL Controller Setup

  1.0 Introduction The following document explains how to add PXL-500 controllers to the Doors32 software. You can connect to a PXL controller via a direct Serial connection, using a USB-Serial adapter or via Ethernet - using the plug-on LAN-520 ...

• EG ONE/ONE+ Important Installation Guidelines (Obsolete)

  To avoid any potential setup issues, Keri strongly recommends the following checks (prior to setup): Ensure 'Smart Switch' is off (Samsung Android devices) - it can be switched back on once setup is complete. Ensure mobile data 3G/4G is off (all ...

• Doors32 - Daylight Savings Time

  1.0 Introduction Due to a change in US Federal law governing the beginning and ending dates for Daylight Saving Time, the firmware on PXL-250s (v6.3.61), PXL-500s/PXL-510s (v8.4.47), and EntraGuards (Gold/Silver/Titanium v7.3.17 and Platinum v9.0.3) ...

• Doors32™ System Upgrade

  With the advent of Windows 10 and the non-support of Windows XP by Microsoft, we strongly advocate upgrading your system to from Doors32 to Doors.NET. Keri Systems has breathed new life into legacy PXL-500 and Entraguard Telephone Entry systems; ...

• Doors32 Obsolete Notification

  Doors32 software is no longer in development and is only fully compatible with the Windows 7 operating system. As Windows 7 will no longer be supported by Microsoft beyond January 2020 we will therefore not be supporting Doors32 beyond that date. ...