Download and Install the Allegion ENGAGE App

Download and Install the Allegion ENGAGE App

Download and Install the Allegion ENGAGE App


 ENGAGE App

  1. Go to the Google Play Store on your supported Android device or the APP Store on your iOS device.
  2. Search for 'Allegion ENGAGE'.
  3. Tap the INSTALL button to download.



  4. Then tap OPEN to open the app. An ENGAGE app icon will also be available on your home screen.


    • Related Articles

    • Capture Locks in the Allegion ENGAGE App

      To manage your locks in the Keri Web Portal and mobile app you should now use the Allegion ENGAGE app to capture the locks. Note: If you are adding multiple locks of the same type and within close range, it is advisable that you know the serial ...
    • Allegion ENGAGE Password Reset

      ENGAGE Password Reset IMPORTANT NOTE: If you need to reset your ENGAGE password this can ONLY be done using the ENGAGE app. On your phone or smart device, open the ENGAGE app. Click on the Forgot Password link (located beneath the LOG IN button). ...
    • Capture the Locks in the ENGAGE App

      To manage your locks in the Confluence Web Portal and mobile app you should now use the Allegion ENGAGE app to capture the locks. Note: If you are adding multiple locks of the same type and within close range, it is advisable that you know the serial ...
    • Allegion No Tour - Full Reference

      1.0 Introduction Allegion No Tour is supported with the Allegion Schlage® Control Smart Locks, NDE or LE Series locks. The No Tour solution allows you to manage your site and its users from virtually anywhere with Keri's Confluence cloud-based app ...
    • Capture the MT20W Reader in the ENGAGE App

      The following document explains how to capture the MT20W USB enrollment reader using the ENGAGE app. Important Notes: - The MT20W will only connect to a 2.4GHz Wi-Fi network. It is not compatible with 5.0 GHz networks. Your router must therefore have ...