Edit Lock Settings

Edit Lock Settings

Editing Lock Settings

There are various locks settings. The available settings are determined by the lock type you are using.

Perform the following steps to change the lock settings:

  1. Go to Devices >> Devices to display the full list of locks on your system.
  2. From the drop-down list to the right of the lock, select Edit from the drop-down list.
  3. The lock settings screen will appear.

    - Name - Allows you to change the name of the lock.
    - Location - Allows you to enter a location for the lock.
    - Model - Displays the exact model of the lock.
    - Serial Number - Displays the specific serial number of the lock.
    - Lock Function - Displays the current operating mode for the lock.
    - Relock Delay - Specifies the unlock time.
    - Relock Delay (ADA) - Specifies the unlock time for ADA-enabled credentials.

    • Related Articles

    • AD-300 Lock Setup Guide

      1.0 Introduction Allegion Schlage AD-300 networked, hardwired locks can be integrated seamlessly with the Doors.NET software when used with the NXT-MSC (Mercury-Powered controllers). You can connect and communicate with up to 32 AD-300s via the ...

    • AD-400 Lock Setup Guide

      1.0 Introduction This section explains how to setup and use the Allegion AD-400 wireless locks with the NXT Mercury Powered (MSC) controllers. These locks have extensive functionality and operating modes and are combined units consisting of the ...

    • Edit Confluence Access Rights

      Certain changes to access rights will be updated simply by placing the No Tour credential onto the MT20W reader, whereas other changes will result in a change to the database and therefore a database download will be required for each locks that are ...

    • Allegion NDE and LE Lock Integration - Quick Start Guide

      1.0 Introduction This quick start guide walks you through the process of setting up the Doors.NET integration between the Allegion Gateway and the Allegion NDE and LE locks. It assumes you have an existing Allegion ENGAGE 'Third-Party' account type ...

    • Allegion NDE and LE Lock Integration - Full Reference Guide

      1.0 Introduction Keri can integrate with the Allegion LE and NDE wireless locks using Schlage Control™ technology. Installation and lock configuration is extremely simple and easy using the Allegion ENGAGE app and the setup in the Doors.NET software ...