EG ONE - Enable Motion Detection (Obsolete)
Motion Detection, when enabled, will instruct the Entraguard app to generate an notification when motion is detected by the on-board camera. When a notification is received you can quickly check the live video feed. The feature is either disabled or active 24/7 but by default the feature is disabled. The following steps explain how to enable the feature.
- From the device home screen, swipe left and press the edit icon.
- Go to Advanced Settings.
- Select Motion Detection.
- Press the icon highlighted to enable the feature (it will go green).
- Then Save.
Related Articles
EG ONE Setup and User Guide (Obsolete)
Standalone document attached.EG ONE - Enabling Notifications (Obsolete)
Notifications will bring your attention to the fact that someone is calling you via the call button located on the front of the Entraguard. Or you can receive notifications with the Motion Detection option - when motion is detected by the on-board ...EG ONE - Enable One-Key Unlock (Obsolete)
The One-Key Unlock feature gives you the less-secure option of unlocking the door immediately following a single press of the unlock icon. By default you are required to enter an unlock password (default is 1111). From the device home screen, swipe ...EG ONE/EG ONE+ Data Sheet (Obsolete)
Standalone document attachedEG ONE/One+ Setup - iOS App (Obsolete)
Setup Procedure Using an iOS Device 1.0 Introduction The Entraguard ONE is an app-based, VOIP Video doorbell/Intercom system design to secure the entrance of a residential or small, commercial building. The ONE units provide video monitoring of a ...