Global Linkage Triggers

Global Linkage Triggers

The following list details all the trigger conditions available within Global Linkage. Multiple trigger conditions can be used to activate Global Linkage Macros. Note: Not all trigger condition can be generated by all controller or hardware types.

Condition Type Available Message Types
Cardholder Access Denied - After Expiration Date
  Access Denied - Anti-Passback Violation
  Access Denied - Area Not Enabled
  Access Denied - Asked For Approval, then Denied
  Access Denied -
  Access Denied -
  Access Denied - Asked For Host Approval
  Access Denied - Before Activation Date
  Access Denied - Deactivated Card
  Access Denied - Duress Code
  Access Denied - Invalid Facility Code
  Access Denied - Invalid Issue Code
  Access Denied - Invalid Magstripe Format
  Access Denied - Invalid PIN
  Access Denied - Invalid Schedule
  Access Denied - Invalid Wiegand Format
  Access Denied - Never At This Schedule
  Access Denied - No Escort Card Presented
  Access Denied - No Second Card
  Access Denied - Not in File
  Access Denied - Occupancy Limit
  Access Denied - Reader Locked
  Access Denied - Unauthorized Assets
  Access Denied - User Limit Reached
  Access Denied - Biometric Device Not Present
  Access Denied - Biometric Error
  Access Denied - Biometric Template Not Present
  Access Denied - Count Exceeded
  Access Granted -
  Access Granted - Anti-Passback
  Access Granted - Anti-Passback, No Entry
  Access Granted - Duress
  Access Granted - Duress, No Entry
  Access Granted - Facility Code
  Access Granted - Facility Code, No Entry
  Access Granted - No Entry
  Access Granted - Reader Unlocked
  Access Granted - IN
  Access Granted - OUT
  Access Granted - Second Transaction Will Follow
  Access Granting - Waiting For Host Response
Control Point Control Point - Activated
  Control Point - Deactivated
  Control Point - Not Configured
  Control Point - Offline
  Control Point - Status
Controller 12 Volt Power Supply Over Voltage
  12 Volt Power Supply Under Voltage
  3.3 Volt Power Supply Over Voltage
  3.3 Volt Power Supply Under Voltage
  Controller Offline = Timeout
  Controller - Online
  Controller - Power Normal
  Controller - Power Trouble
  Controller - Tamper Alarm
  Controller - Tamper Clear
  Controller Card Downloaded
  Controller Command
  Controller Command Discarded
  Controller Command Queued
  Controller Command Status
  Controller Configuration Saved to Flash Memory
  Controller Credential Database Cleared Due To SRAM Buffer Overflow
  Controller Credential Database Saved to Flash Memory
  Controller ID Report
  Controller Power-Up Diagnostics
  Controller Transaction Count Exceeds Limit
  Daylight Savings Started
  Daylight Savings Stopped
  Low Battery
  NAK
  Real Time Clock Reset
  Unknown Controller is Trying to Connect
Monitor Point Mask - Monitor Point
  Monitor Point - Alarm
  Monitor Point - EOL Resistance
  Monitor Point - Grounded Line
  Monitor Point - Non-Settling Error
  Monitor Point - Offline
  Monitor Point - Open Line
  Monitor Point - Secure
  Monitor Point - Shorted Line
  Monitor Point - Mask Active
  Monitor Point - Mask Inactive
  Monitor Point - Not Configured
Panel Panel - Offline/Invalid Command
  Panel - Offline
  Panel - Offline/Timeout
  Panel - Online
  Panel - Power Normal
  Panel - Power Offline
  Panel - Power Trouble
  Panel - Tamper Alarm
  Panel - Tamper Clear
  Panel - Tamper Offline
  Panel - Offline, Disabled From Host
Reader Access Denied - Asked For Host Approval, then Denied
  Access Denied - Asked For Host Approval, then timed out
  Access Denied - Before Activation Date
  Access Denied - Deactivated Card
  Access Denied - Duress Code
  Access Denied - Invalid Facility Code
  Access Denied - Invalid Issue Code
  Access Denied - Invalid Magstripe Format
  Access Denied - Invalid PIN
  Access Denied - Invalid Schedule
  Access Denied - Invalid Wiegand Format
  Access Denied - Never At This Schedule
  Access Denied - No Escort Card Presented
  Access Denied - No Second Card
  Access Denied - Not In File
  Access Denied - Occupancy Limit
  Access Denied - PIN Timeout
  Access Denied - Reader Locked
  Access Denied - Unauthorized assets
  Access Denied - User Limit Reached
  Access Denied - Biometric Device Not Present
  Access Denied - Biometric Error
  Access Denied - Biometric Template Not Present
  Access Denied - Count Exceeded
  Access Event - Granted Double Presentation
  Access Granted
  Access Granted - Anti-Passback
  Access Granted - Anti-Passback, No Entry
  Access Granted - Duress
  Access Granted - Duress, No Entry
  Access Granted - Facility Code
  Access Granted - Facility Code, No Entry
  Access Granted - No Entry
  Access Granted - Reader Unlocked
  Access Granted IN
  Access Granted OUT
  Access Granting - Second Transaction Will Follow
  Access Granting - Waiting For Host Response
  Door Locked
  Door Locked By Timezone
  Door Not Opened
  Door Opened
  Door Unlocked
  Door Unlocked by Timezone
  Exit Request Denied - Airlock is Busy
  Mask - Reader Forced Open
  Mask - Reader Held Open
  Mechanical override used on the wireless reader
  Primary Request To Exit
  Reader Access Cycle Ending
  Reader Access Cycle Starting
  Reader Contact - Door Closed
  Reader Contact - Door Secured (Forced Open is Masked)
  Reader Contact - Door Secured (Held Open is Masked)
  Reader Contact - Door Secured (Previously Forced Open)
  Reader Contact - Door Secured (Previously Held Open)
  Reader Contact - EOL Tolerance
  Reader Contact - Forced and Held Open
  Reader Contact - Forced Open
  Reader Contact - Forced Open (Held Open is Masked)
  Reader Contact - Grounded Line
  Reader Contact - Held Open
  Reader Contact - Held Open (Forced Open is Masked)
  Reader Contact - Mode Unlocked
  Reader Contact - Non-Setting Error
  Reader Contact - Offline
  Reader Contact - Open Line
  Reader Contact - Shorted Line
  Reader Contact Door Open - Forced Open is Masked
  Reader Contact - Masked Both Forced Open AND Held Open
  Reader Contact Not Configured
  Reader Mode Change - Card and PIN
  Reader Mode Change - Card OR PIN
  Reader Mode Change - Facility Code
  Reader Mode Change - Lock
  Reader Mode Change - Lockdown
  Reader Mode Change - Lockout
  Reader Mode Change - PIN only
  Reader Mode Change - Unlocked
  Reader Pre-Alarm
  Reader Tamper Alarm
  Reader Tamper Fault
  Reader Tamper Not Configured
  Reader Tamper Offline
  Reader Tamper Secure
  Reader Unlocked, Door is Closed
  Reader Unlocked, Door is Open
  Remote Temp Unlock
  Remote Temp Unlock - Door Use Not Verified
  Remote Temp Unlock Denied - Airlock is Busy
  Remote Temp Unlock - Not Used
  Request to Exit
  Request to Exit - Door Use Not Verified
  Request to Exit, Not Used
  RTE Contact - EOL Tolerance
  RTE Contact - Grounded Line
  RTE Contact - Non Settling Error
  RTE Contact - Normal
  RTE Contact - Offline
  RTE Contact - Open Line
  RTE Contact - Shorted Line
  RTE Not Configured
  Secondary Request to Exit
  The wireless reader (Aperio) has a low battery
  The wireless reader (Aperio) has a stalled motor
  The wireless reader (Aperio) has an unknown fault. Lockset not paired with Hub
  The wireless reader (Aperio) has radio disturbance
  The wireless reader (Aperio) has RF communication loss
  User PIN Command
Situation Manager Situation Manager Changed to Global Lock
  Situation Manager Changed to Global Unlock
  Situation Manager Changed to Normal
  Situation Manager Level Changed to Custom Threat Level 1
  Situation Manager Level Changed to Custom Threat Level 2
  Situation Manager Level Changed to Custom Threat Level 3
  Situation Manager Level Changed to Custom Threat Level 4
  Situation Manager Level Changed to Custom Threat Level 5
Video Source Video - Camera Tamper
  Video - Camera Video Loss
  Video - Crowd Dispersal
  Video - Crowd Forming
  Video - Explosion
  Video - Fire Detected
  Video - Hazardous Spill
  Video - Motion Detected
  Video - Object Left Behind
  Video - Object Removed
  Video - Object Thrown
  Video - Occupancy Reached Limit
  Video - Out of Focus
  Video - Person Crawling
  Video - Person Fallen
  Video - Person Intrusion
  Video - Person Loitering
  Video - Person on Watchlist
  Video - Person Running
  Video - Person Wrong Direction
  Video - Smoke Related
  Video - Spraypaint
  Video - Tailgating Detected
  Video - Vehicle Illegal Parking
  Video - Vehicle Intrusion
  Video - Vehicle Moving Too Fast
  Video - Vehicle Moving Too Slow
  Video - Vehicle Parking
  Video - Video Stopped
  Video - Vehicle Wrong Direction
  Video - View Changed
 Video - View Not Changing


    • Related Articles

    • Global Linkage - Quick Start Guide

      1.0 Introduction The Global Linkage feature in Doors.NET allows you to automate many system functions, such as unlocking doors, changing reader modes, locking down certain areas of the building, granting anti-passback amnesty to cardholders, masking ...
    • Global Linkage Data Sheet

      Global Linkage Data Sheet (attached)
    • Global Linkage Overview

      The Global Linkage Module and related user interface screens provide a means of automating system functions, features and notifications system-wide. The configuration of the Global Linkage Module consists of two parts; the Global Macro (what you want ...
    • Global Linkage Macros

      The following list details all the Global Linkage Macro options that are available in Doors.NET. These are the 'when' conditions which can be thought of as 'what you would like to happen' - When the system sees a specific trigger it will execute the ...
    • Global Unlock - Card Driven

      Using the Global Linkage module to Activate Global Unlock using a Card 1.0 Introduction This section explains how to use the Global Linkage Automation module to configure a card dedicated to the purpose of performing a Global Unlock. You can have a ...