The software has three main working areas:

1. Top - Toolbar and Ribbon - provides access to all software features.
2. Middle - work space / data display area, typically using a Grid to display information.
3. Bottom - quick-open status tabs for data windows.
   
   

Locating Hardware

To view a list of all the hardware on the system, go to Setup >> Hardware Setup >> All.

At the top of the hardware window is the communications gateway(s) - you may have more than one. If you expand the gateways you will then see a list of all the controllers which exist on the system.

If you expand any of the controllers you will then be able to locate the controller's; readers, inputs or outputs.

If you then select any of the hardware objects (reader, input or output) you will see its properties displayed on the properties grid on the right.

Viewing the Hardware Status

You can quickly view all the doors, controllers, inputs and outputs on the system via each of the quick-open tabs located in the lower left corner of the user interface.

Doors

Inputs

Outputs 

Controllers