Q. What is the Correct Procedure for Factory Resetting an NXT-MSC 2 or 4-door Controller?
The following video explains the steps that need to be taken to perform a factory reset on an NXT-MSC controller and also when you should perform a factory reset:
Controller Factory Reset Procedure The following reset procedure will completely erase all system configuration and cardholders and will return the controller to its factory default settings. Ensure the J3 jumper is across both pins. Press the white ...
1.0 Introduction This document covers the basic setup of an NXT Mercury Powered (NXT-MSC) controller in Doors.NET or Borealis. It assumes your Doors.NET or Borealis system has already been setup. Important Notes: A Doors.NET system should be licensed ...
1.0 Introduction The following document outlines the functions and expected behavior of the LEDs and jumpers on an NXT-MSC controller. 2.0 NXT-MSC Controller Diagram 3.0 Controller LED Function and Behaviour Purpose LED LED Behavior Network Activity ...
1.0 Introduction This document contains basic information for the installation of the NXT-MSC 2D and 4D controllers. The NXT-MSC controller has recently been updated from a green PCB to a black colored PCB. All NXT controllers and Keri peripherals ...
1.0 Introduction The airlock features is available on NXT-MSC or Mercury SCP controllers when Area Control is enabled on the license. This is so that you can set up two or more areas as 'airlock' areas. Anti-passback is not required for airlocks to ...