KB Controller Installation Guide
Borealis KB Controller Installation Guide (attached).
Related Articles
KB Controller Firmware Upgrade
1.0 Introduction The following steps explain how to upgrade the firmware on a KB controller via the Borealis user interface. 2.0 Check if the Controller Requires a Firmware Upgrade Once you have the controller(s) online, open live events via the last ...
KB Controller Technical Overview
1.0 Introduction The following document provides you with an overview of the KB controller integration with Borealis. The KB controller is a 2D or 4D controller built for Borealis. As well as all the essential features you would expect from an access ...
Borealis Full Setup Guide
1.0 Introduction This document aims to guide you step-by-step through setting up a new Borealis system. It explains how to register a new account, create a new system. Add a new site, claim a hub to the site and then add hardware (such as controllers ...
Add a KB Controller via Manual Add
The following steps explain how to manually add a KB controller using the Borealis web client. Again, before manually adding KB controllers, you must already have the KB hub online and it must have completed its initial update: From the main menu, ...
Add a KB Controller via Scan
1.0 Introduction From the main menu, click on Hubs. Your hub will appear in the list. Locate the Actions drop-down menu on the right, click the down-arrow and select Scan, or click the SCAN button. The scan function will scan the local network for KB ...