The table below lists all of the available procedure action item selections. Changing the Action Item Type drop-down selection will change the available Action Item Properties.
| Action Type | Available Selections |
| Access Area Control | Areas 0 - 31 (disable, enable or set occupancy limit) |
| Anti-Passback Free Pass | All cardholders |
| Certain Card Number | |
| Any Area | |
| Specific Area | |
| Control Point Control | Control Point Off |
| Control Point On | |
| Control Point Pulse | |
| Monitor Point Mask | Monitor Point Mask |
| Monitor Point Unmask | |
| Procedure Control | Abort Delayed Procedure |
| Execute Procedure | |
| Resume Delayed Procedure | |
| Reader LED Mode Control | Set Reader LED Mode 1 |
| Set Reader LED Mode 2 | |
| Set Reader LED Mode 3 | |
| Reader Mask - Forced Open | Mask Reader Forced |
| Unmask Reader Forced | |
| Reader Mask - Held Open | Mask Reader Held |
| Unmask Reader Held | |
| Reader Mode Control | Card And PIN |
| Card Or PIN | |
| Disable Biometric Verify | |
| Disable Cipher Mode | |
| Disable Extended User Commands | |
| Disable Two Card Rule | |
| Enable Biometric Verify | |
| Enable Cipher Mode | |
| Enable Extended User Commands | |
| Enable Two Card Rule | |
| Facility Code | |
| Lockdown | |
| Locked | |
| Lockout | |
| PIN Only | |
| Unlocked | |
| Reader Mode Control - Timed | Change Reader Mode for a duration of time |
| Reader Momentary Unlock | Select Reader and Unlock Time |
| Reader Momentary Unlock, Abort Door Status | Select Reader |
| Reader Temporary LED Control | On Color (Off, Red, Green, Amber) |
| Off Color (Off, Red, Green, Amber) | |
| On-Time (100ms units) | |
| Off-Time (100ms units) | |
| Repeat Count | |
| Beep Count | |
| Time Delay | Delay in seconds |
| Trigger Variable Control | Set Variable to False |
| Set Variable to True | |
| Schedule Control | Turn Off Until Next Change |
| Turn On Until Next Change | |
| Turn Off | |
| Turn On | |
| Resume Schedule | |
| Refresh Schedule |