Local Linkage Triggers

Local Linkage Triggers

The table below lists all of the available trigger conditions. Changing the Source Type drop down selection will change the available Transaction Type selection.

Source Type Transaction Type Available Selection Criteria
Access Area Access Area Area Disabled
    Area Enabled
    Occupancy Count Reached Zero
    Occupancy Count Reached Downward Limit
    Occupancy Count Reached Upward Limit
    Occupancy Count Reached Maximum Limit
    Multi-Occupancy Mode Change
    Multi-Occupancy Mode Change Failed
Access Control Reader ACR Mode Change Lockdown
    Unlocked
    Lockout
    Facility Code
    Locked
    PIN only
    Card And PIN
    Card Or PIN
  Binary Card Data (Wiegand) Access Denied: Invalid Format
  Formatted Card Access Denied: Reader Locked
    Access Denied: Reader Unlocked
    Access Denied: Invalid Facility Code
    Access Denied: Invalid Facility Code Ext.
    Access Denied: Not In File
    Access Denied: Invalid Issue Code
    Access Granted: Facility Code, Door Not Used
    Access Granted: Facility Code
    Access Denied: Asked for Host Approval, Timeout
    Granting Access: Waiting on Host
    Access Denied: Denied Count Exceeded
    Access Denied: Asked For Host Approval, Denied
    Access Denied: Airlock is Busy
  Formatted Card with Cardholder ID Access Denied: De-Activated Card
    Access Denied: Before Activation Date
    Access Denied: Before Expiration Date
    Access Denied: Invalid Schedule
    Access Denied: Invalid PIN
    Access Denied: Anti-Passback Violation
    Access Denied: Anti-Passback Violation, Door Not Used
    Access Granted: Anti-Passback Violation
    Access Denied: Duress Code Detected
    Access Granted: Duress
    Access Granted: Duress, Door Not Used
    Access Granted: Door Not Used
    Access Denied: PIN Timeout
    Access Granted
    Access Denied: Never Allowed
    Access Denied: No Second Card Presented
    Access Denied: Occupancy Limit Reached
    Access Denied: Access Area Not Enabled
    Access Denied: Usage Limit
    Access Denied: Unauthorized Assets
    Access Denied: Biometric Verification Failed
    Granting Access: Door Used/Not Used Will Follow
    Access Denied: Biometric, No Biometric Template
    Access Denied: Biometric, No Biometric Device
    Access Denied: No Escort Card Presented
    Access Denied: Airlock is Busy
  User Entered Command User Command (press *, enter command number, press #)
ACR: Alternate Reader Tamper Change of State Alternate Tamper Became Active
    Alternate Tamper Became Inactive
ACR: Door Position Sensor Door Position: Change of State Disabled From Host
    Offline
    Any Door Secured Message
    Door Secured: Previously Forced Open
    Door Secured: Previously Held Open
    Door Secured: Previously Forced or Held Open
    Door Closed
    Door Opened (No Alarm)
    Held Open Pre-Alarm Only
    Any Door Alarm Message
    Forced Open Only
    Held Open Only
    Both (Forced then Held Open)
    Held Open Anytime
    Either (Forced or Held)
    Trouble
ACR: Reader Tamper Change of State Tamper Became Active
    Tamper Became Inactive
ACR: RTE 1 Input Request To Exit Request To Exit - Door Use Not Verified
    Request to Exit, Not Used
    Request To Exit
    Remote Temp Unlock, Not Used
    Remote Temp Unlock
    Exit Request Denied - Airlock is Busy
    Remote Temp Unlock Denied - Airlock is Busy
ACR: RTE 2 Input Request To Exit Request To Exit - Door Use Not Verified
    Request to Exit, Not Used
    Request To Exit
    Remote Temp Unlock, Not Used
    Remote Temp Unlock
    Exit Request Denied - Airlock is Busy
    Remote Temp Unlock Denied - Airlock is Busy
Control Point Change of State Disabled From Host
    Off-Line: No Report
    Output is Inactive
    Output is Active
Controller Diagnostics System Controller Power-Up
Controller Local Inputs Change of State Tamper Became Active
    Tamper Became Inactive
    Power Monitor Became Active
    Power Monitor Became Inactive
Controller to Host Driver System Host Off-Line
    Host On-Line
    Transaction Count Over Preset Limit
    Configuration Saved to Flash Memory
    Credentials Saved to Flash Memory
    Credentials Cleared - SRAM Buffer OverFlow
Monitor Point Change of State Disabled From Host
    Offline: No Report
    Secure: Input is Inactive
    Alarm: Input is Active
    Fault
    Exit Delay in Progress
    Entry Delay in Progress
    Inactive (Was Active)
    Active (Was Inactive)
    Inactive (Was Alarm)
    Inactive (Was Fault)
    Inactive (Was Alarm or Fault)
Panel Cabinet Tamper Change of State Tamper Became Active
    Tamper Became Inactive
Panel Diagnostics System Panel Diagnostics
Panel Power Monitor Change of State Power Monitor Became Active
    Power Monitor Became Inactive
Panel to Controller Driver Panel Communications Disabled
    Off-Line: Timeout
    Off-line: Invalid Serial Number
    Off-Line: Command Too Long
    On-Line: Normal Connection
Procedure Change of State Cancelled (Abort Delay)
    Execute
    Resume
    Execute Prefix Type B Actions
    Execute Prefix Type C Actions
    Execute Prefix Type D Actions
    Resume Prefix Type B Actions
    Resume Prefix Type C Actions
    Resume Prefix Type D Actions
    Command Issued with No Action Items
Trigger Change of State Trigger Conditions Became True
    Trigger Conditions Became False
Trigger Variable Change of State Trigger Variable Became False
    Trigger Variable Became True
Weekly Schedule Change of State Schedule Became Inactive
  Schedule Became Active
    • Related Articles

    • Local Linkage Overview

      The Local Linkage section is by far the most powerful feature of the Doors.NET system. It is an advanced input/output management application that allows you to easily customize the operational mode of the controller to suit individual requirements. ...
    • Local Linkage - Program an Output to Follow an Input

      1.0 Introduction A basic Local Linkage example is to program an output on the system to follow an input, so that when the input goes active the output automatically goes active. When the input goes inactive then the output also goes inactive. Prior ...
    • Local Linkage - Import and Export

      The Linkage Export/Import feature allows you to save Local Linkage actions which can then be imported and used on other controllers (or completely different Doors.NET systems), potentially saving a lot of system programming time. Note: ALL the ...
    • Global Linkage Triggers

      The following list details all the trigger conditions available within Global Linkage. Multiple trigger conditions can be used to activate Global Linkage Macros. Note: Not all trigger condition can be generated by all controller or hardware types. ...
    • Global Linkage - Quick Start Guide

      1.0 Introduction The Global Linkage feature in Doors.NET allows you to automate many system functions, such as unlocking doors, changing reader modes, locking down certain areas of the building, granting anti-passback amnesty to cardholders, masking ...