Mercury LP Controllers Overview

Mercury LP Controllers Overview

Introduction

Mercury LP hardware

 

 

In addition to our own Mercury Powered NXT controllers (NXT-MSC), Keri also offers non-proprietary authentic Mercury Security hardware, which is supported by Doors.NET Professional Edition software. The LP hardware platform consists of the LP1501 System Processor Module, LP1502 System Processor Module, LP2500 System Processor Module, LP4502, the Series 3; MSC-SDM Single Door Module, MSC-DDM Dual Door Module, MSC-SDME Ethernet Enabled Single Door Module, MSC-ICM Input Control Module and the MSC-OCM Output Control Module.

 

LP1501 System Processor Module

 

The LP1501 Controller is the next-generation intelligent controller within the LP family and is built on the non-proprietary Mercury hardware platform. Feature rich and fully Mercury enabled, the LP1501 provides customers with a high-performance, Ethernet ready, cost-effective dual card reader panel capable of controlling a single opening.

 

The LP1501 is expandable up to 16 SDME network ready door controllers for a total of 17 readers. Easy installation with Power over Ethernet (PoE) makes this the top choice for a single-door controller.


Once configured, the LP1501 functions independently of the host and is capable of controlling access and managing elaborate processes such as relating selected system devices and their activity to other onboard devices, allowing actions and activities to transpire without host intevention.

 

Offering powerful flexibility, the LP1501 is capable of interfacing with an array of reader technologies for a single opening. Reader ports support separate in/out readers and technologies that include Wiegand, clock and data, RS-485, magnetic stripe, keypads, LCD, OSDP and biometrics.


The result is the flexibility, versatility, and reliability you need for system success. Combined with Keri’s Doors.NET Professional Edition software, the LP1501 provides customers the ultimate in power and flexibility.

 

LP1502 System Processor Module

 

The LP1502 is a powerful system processor module capable of managing two doors/readers “on board” and up to 64 doors and thousands of I/O points via connection to additional reader or I/O modules. Based on the intelligent, non-proprietary Mercury hardware, the platform uses an RS-485 or Ethernet link to connect to Doors.NET Professional Edition software to provide access control, alarm management and scheduled operations all in one package.

 

With native TCP/IP connectivity, the LP1502 platform functions independently of the host, controlling access, managing alarms and interfacing with an array of reader technologies through its Wiegand, magnetic stripe and biometric RS-485 connectivity. In addition, it is capable of centralized biometric template management and it supports the use of OSDP readers. The result is the flexibility, versatility and reliability you need for system success.

Alarm Management capabilities include standard or customized end-of-line resistances, programmable sensitivity and hold time for line conditioning, entry delay latching and unlatching options, and entry exit delays.

The LP1502 is the intelligent cornerstone of an access system, providing its first two reader capabilities and the capacity to expand to up to 64 doors. Reliably distributing intelligence, the LP1502 ensures that activities generated by select devices can be related to other devices for continued actions without host intervention.

 

The result is the flexibility, versatility, and reliability you need for system success. Combined with Keri’s Doors.NET Professional Edition software, the LP1502 provides customers the ultimate in power and flexibility.

 

LP2500 System Processor Module

 

The LP2500 is an intelligent controller platform with native network support. This powerful and high-performance platform provides an Ethernet ready, fault-tolerant panel capable of efficiently managing a large network of reader and I/O modules in any system design.


Based on the intelligent, non-proprietary Mercury Access Foundation, the platform uses an RS-485 or Ethernet link to connect to Keri’s Doors.NET Professional Edition software to provide access control, alarm management and scheduled operations all in one package. The LP2500 is capable of elaborate processes and procedures without host intervention. Once configured, the LP2500 functions independently of the host, and is capable of controlling access, managing alarms, interfacing with an array of Mercury hardware devices, all while providing the decision-making oversight that each system configuration requires.

Providing centralized biometric template management, the LP2500 supports the range of reader technologies, including Wiegand, magnetic stripe and biometric RS-485 connectivity.


As an intelligent system cornerstone capable of enterprise-wide performance, the LP2500 provides the greatest system capacity within Mercury’s family of controller platforms. The LP2500 is best deployed in systems where high-end capabilities and network-ready capacity are required. For high device counts, large numbers of readers and a high volume of system activity, the LP2500 is the controller of choice. The result is the flexibility, versatility, and reliability you need for system success. Combined with Keri’s Doors.NET Professional Edition software, the LP2500 provides customers the ultimate in power and flexibility.

 

LP4502 System Processor Module

 

The LP4502 supports a variety of extended features including High Assurance Credential Authentication and complies with the BACnet IP communication protocol. A USB-to-Ethernet IP adapter provides a redundant host IP connection. It has direct hardware support for 2 openings and can scale to 64 access points. Built on proven Authentic Mercury hardware, this high-performance intelligent controller embeds elevator-destination dispatch and provides integrated power-management analytics to proactively detect failure before it occurs.

 

The Linux based controller family offers support for the latest cyber security standards, robust platform of reliability, and a seamless upgrade

for existing Mercury Security based customers.

 

Providing centralized biometric template management, the LP2500 supports the range of reader technologies, including Wiegand, magnetic stripe and biometric RS-485 connectivity.


    • Related Articles

    • Mercury EP Controllers Overview

      Introduction In addition to our own Mercury Powered NXT controllers (NXT-MSC), Keri also offers non-proprietary authentic Mercury Security hardware, which is supported by Doors.NET Professional Edition software. The hardware platform consists of the ...
    • Elevator Control with Mercury EP/LP Series Hardware

      1.0 Introduction This section explains how to setup Elevator Control when using Mercury SCP hardware. This example uses LP-4502 and MR16IN and MR16-OUT modules. Elevator Control is a licensed feature and therefore must be purchased and enabled in ...
    • Mercury MP Controller Overview

      Introduction The new Mercury MP Intelligent Controllers provide a bridge between today’s urgent security needs and tomorrow’s emerging realities. Featuring Secure world processing within a trusted execution environment and a future-ready, on-device ...
    • LP Controller - Full Controller Configuration

      LP Series Full Setup and Configuration Guide 1.0 Introduction This section explains how to setup and configure all controller settings and advanced options. All these settings can be found either by logging into the controller via a web browser or by ...
    • Mercury MP Controller Full Setup Guide

      1.0 Introduction This section explains how to setup and configure all controller settings and advanced options. All these settings can be found either by logging into the controller via a web browser or by accessing the controller's 'internal ...