MS Reader Specifications

MS Reader Specifications

Specifications:

Size:

3.4” H x 1.4” W x 0.38” T (MS-3000) (86mm x 36mm x 10mm)
4.3” H x 3.0” W x 0.38” T (MS-5000) (109mm x 76mm x 10mm)
8.5” H x 6” W x 0.83” T (MS-7000) (21.6cm x 15.2cm x 2.1cm)

Weight:

2.1 oz. (59g) (MS-3000)
3.2 oz. (90g) (MS-5000)
1.3 lbs. (582g) (MS-7000)

Read Range*:

Up to 4” (10cm) (MS-3000)
Up to 6” (15cm) (MS-5000)
Up to 14” (35cm) (MS-7000)

Input Voltage:

+12 VDC nom. (5-14 VDC) (MS-3000)
+12 VDC nom. (5-14 VDC) (MS-3000)
+11 VDC to +14 VDC (MS-7000)

Current Draw:

50 mA typical (MS-3000)
100 mA typical (MS-5000)
200 mA typical (MS-7000)

Operating Temperature:

-40° C to +65°C

LED Indicator:

Tri-Color Standard (Red, Green, Amber)

Audio Tone:

Standard Frequency: 125 KHz excitation, 62.5 KHz data return

Warranty:

Lifetime warranty against defects in materials and workmanship. * Read range is stated in a clean RF and electrical environment with KC-10X card presented parallel to reader surface. Note: Speci cations subject to change without notice. Trademarks are the property of their respective owners.
    • Related Articles

    • MS Reader Troubleshooting

      Troubleshooting the MS Reader Installation Problem Probable Cause Corrective Action The reader does not recognize a card/tag (no beep, no LED flash) One or more of the reader's wiring connections are incorrect. The reader is not receiving proper ...
    • MS5000 Reader Installation Guide

      The MS-5000 MiniStar Reader 1.0 Introduction The MS-5000 MiniStar Reader is intended for installation in a single gang electrical "J-Box," in proximity applications where an unobtrusive reader is required. It can also be mounted directly onto ...
    • MS4000 Reader Installation Guide

      The MS-4000 ShootingStar Reader 1.0 Introduction The MS-4000 ShootingStar Reader is intended for installation on a solid metal surface, in proximity applications where a vandal-proof reader is required. The reader is housed in a weatherproof, ...
    • MS7000 Reader Installation Guide

      The MS-7000 SuperStar Reader 1.0 Introduction The MS-7000 SuperStar Reader is intended for installation in a single gang electrical "J-Box," in proximity applications where an unobtrusive reader is required. It can also be mounted directly onto ...
    • MS3000 Reader Installation Guide

      The MS-3000 MicroStar Reader 1.0 Introduction The MS-3000 MicroStar reader is intended for installation on a window mullion or a door frame, on or off metal, in proximity applications where an unobtrusive reader is required. The MS-3000 reader is ...