Related Articles
Neutron Cable Requirements
Input Power - Belden 8461 - two conductor, stranded, AWG 18 wire NXT Readers Belden 8723 (or equivalent) - this is a 2-pair shielded, stranded, twisted cable. Belden 9842 or equivalent (two twisted pairs in one jacket). AWG 24 (or greater). RS-485 ...
Neutron Controller Specifications
Small Enclosure Size: 2.75” H x 4.25” W x 1.32” D Full Kit Enclosure Size: 7.25” H x 6.6” W x 1.8” D PC Board, No Enclosure Size: 2.36” H x 4.0” W x 0.78” D Input Voltage: + 12 VDC nom. (9-15 VDC) Current Draw: NEUT Controller - 250mA Inputs (2): ...
Neutron Introduction
1.0 Introduction Neutron is a single-door controller which is configured and managed using Keri's Visual Doors software. It is a small, low-cost, easy to install controller that supports 1 or 2 NXT readers (1 x entry and 1 x exit reader) and is ...
Neutron Licensing Requirements
To use the Neutron controllers you will need a license key with the Neutron hardware type enabled. The license key with Neutron enabled will automatically be configured to support up to 8 controllers. You can either contact Keri Systems sales for a ...
Neutron Troubleshooting Guide
1.0 The Neutron Controller is Showing as Offline Verify the controller is powered-up. Verify the TB2 network connection terminal block is properly connected. Verify the wiring to the TB2 terminal block. If all controllers are offline ensure the ...