New System Flow Diagram (With Organizations)

• Related Articles

• Create a New System

  1.0 Introduction Every Borealis installation will require a ‘System’ to initially be added. The system is created and authorized by Keri Systems and you will be added to the system as an operator with full administration rights. What is a System? A ...

• System Setup

  Introduction Note: If you are using the new user interface, the instructions can be found here: https://help.kerisys.com/portal/en/kb/borealis/new-user-interface/system-setup This section explains how to setup a new Borealis cloud access control ...

• Borealis - System Configuration

  Configure The Borealis System This section explains how to configure a new Borealis access control system. It details all the steps that need to be taken to configure the controller, readers and other hardware as well as access control settings, such ...

• Create a New Site

  1.0 Introduction Typically defined as a subnet. Each site requires a hub that will be configured for the hardware type installed at the site. A hub is limited to 32 doors per controller type. The site defines the hardware type to be used. Every ...

• Add a New Operator Account

  1.0 Introduction The following steps explain how to add a new operator to Borealis that will have rights to administer the Borealis system. Important Notes: - To add a new operator account you must ensure the new operator e-mail address is already ...