NXT 6RK Reader/Keypad Installation Drawing

 

• Related Articles

• NXT 6RK Reader and Keypad Installation Guide

  The Keri NXT-6RK is a keypad reader typically used for card + PIN dual verification applications. It transmits keypad data in either 8-bit burst (default) or 26-bit Wiegand formats and can be used as a keypad-only device. Since the NXT-6RK ...

• NXT-6RK Reader/Keypad Setup Guide

  1.0 Introduction The following document explains how to setup an NXT 6RK keypad in the Doors.NET software and then goes on to explain some basic reader configuration. The NXT-6RK connects to a Standard NXT or NXT-MSC controller via a Reader Interface ...

• NXT-1R/-3R/-5R Reader - Installation Guide

  1.0 Wiring and Layout Diagrams 1.1 NXT-1R/-3R/-5R Readers This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable ...

• NXT Reader Setup

  1.0 Introduction NXT Readers are used use exclusively with Keri’s revolutionary access control system based on the NXT and the MSC Series of IP-based Controllers. Communication to the readers is via the RS-485 buses allowing the data to be encrypted ...

• NXT Readers Data Sheet

  NXT Readers Data Sheet