NXT Hardware Cable Requirements

NXT Hardware Cable Requirements

Attached.

    • Related Articles

    • NXT 2D/4D Hardware Installation Guide

      1.0 Introduction This document contains basic information for the installation of the NXT 2 door and NXT 4 door controller. 2.0 Product Specifications 2.1 Unit Dimensions • NXT 2D/4D controller PCB - 6.75 inches high by 6.00 inches wide by 1.75 ...
    • Standard NXT Controller Setup

      NXT Controller Setup NXT 4 door controller Introduction This document covers the basic configuration of NXT controllers in Doors.NET software. It assumes Doors.NET has already been successfully installed on your host PC, the software license has been ...
    • Earth-Grounding Keri NXT Controllers

      1.0 Introduction You should make a quality earth ground connection to all Keri NXT 2D or 4D controllers to ensure the best possible operating conditions for the controllers. An earth ground brings all electrically neutral lines to the earth's surface ...
    • NXT 2D/4D Controller Factory Reset

      Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...
    • NXT 2D/4D Basic Controller Setup in Doors.NET

      Introduction This document covers the basic configuration of NXT controllers in Doors.NET software. It assumes Doors.NET has already been successfully installed on your host PC, the software license has been activated, and the gateway has been ...