NXT RM3 (Reader Interface Module) Data Sheet

• Related Articles

• NXT WI Plus Data Sheet

  NXT WI+ Data Sheet (attached)

• NXT Reader Interface Module Specifications

  Specifications  Size  • When mounted on the NXT Controller - 6.50 inches high by 5.50 inches wide by 2.50 inches deep, not including wiring connectors - 16.51 cm by 13.97 cm by 6.35 cm 2.2 Power/Current Requirements • 10 to 14 VDC @ 100 mA (maximum ...

• NXT-RM3 Module - Installation Guide

  1.0 Wiring and Layout Diagrams 1.1 Reader Interface Module (RIM) Diagram Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide ...

• NXT-RM3 v2 Module - Installation Guide

  1.0 Introduction The special purpose NXT RM3 v2 is designed for use without an NXT or NXT-MSC controller and its main function is to pass-through 64-bit NXT credential data to a third-party controller. The RM3 v2 module connects directly onto an NXT ...

• NXT RIM-WI-PLUS Module Installation Guide

  1.0 Introduction This guide explains how to install and configure the NXT Wiegand-Only Plus Reader Interface Module which is a permanent replacement for the WI (Wiegand-Only) module. The module connects directly onto one of the communication buses of ...