PXL-500 Controller Data Sheet

PXL-500 Controller Data Sheet

  PXL-500 Controller Data Sheet

    • Related Articles

    • PXL-500 Controller Setup in Doors.NET

      1.0 Introduction This section covers the basic configuration of PXL controllers in Doors.NET software. It assumes Doors.NET has already been successfully installed on your host PC, the software license has been activated, and the PXL gateway has been ...
    • PXL-500 Controller Specifications

      Specifications 1.0 Unit Dimensions • PXL-500/PXL-510 controller PCB - 6.75 inches high by 6.00 inches wide by 1.75 inches deep, including wiring connectors - (17.15 cm by 15.25 cm by 4.45 cm) • PXL-500/PXL-510 controller PCB with an LCD-1 ...
    • PXL Controller Firmware Upgrade

      PXL Controller Firmware Upgrade Procedure 1.0 Introduction PXL controllers do not have flash firmware and so they require a physical chip change. The PXL Firmware Upgrade ship kit comes with a chip extraction tool to assist with the removal and ...
    • PXL-500 Controller Offline Flowchart

      This flowchart is aimed at helping installers to troubleshooting an offline PXL-500 controller network.
    • PXL-500 Controller Factory Reset

      PXL-500 Standard Factory Reset Procedure If you're turning controller power on for the first time, or have just changed the EPROM/PIC, the PXL-500/PXL-510 controller RAM must be reset before performing any other action... this clears any spurious ...