EG ONE - Set the Time (Obsolete)

EG ONE - Set the Time (Obsolete)

Once you have added the unit you will need to manually set the time. This ensures accurate functionality of features, such as notifications and viewing live video.

  1. On the device home screen, swipe left, then press the edit icon.
  2. Press the Advanced Settings button.
  3. Press Set Time.
  4. Confirm the prompt and the unit time will be synchronized with the time on your smart device.

IMPORTANT NOTE: As well as setting the time when initially adding the unit, you will also need to manually set the time if the unit loses power or following a Daylight Savings change.

    • Related Articles

    • EG ONE - Set the Unlock Time (Obsolete)

      The unlock time is configurable from 1 to 100 seconds. The Entraguard unit's unlock time, by default, is set to 1 second. From the device home screen, swipe left, then press the edit icon. Locate the unlock time setting, then press the value it is ...

    • EG ONE Setup and User Guide (Obsolete)

      Standalone document attached.

    • EG ONE/One+ Setup - iOS App (Obsolete)

      Setup Procedure Using an iOS Device 1.0 Introduction The Entraguard ONE is an app-based, VOIP Video doorbell/Intercom system design to secure the entrance of a residential or small, commercial building. The ONE units provide video monitoring of a ...

    • EG ONE/EG ONE+ Data Sheet (Obsolete)

      Standalone document attached

    • EG ONE - Enabling Notifications (Obsolete)

      Notifications will bring your attention to the fact that someone is calling you via the call button located on the front of the Entraguard. Or you can receive notifications with the Motion Detection option - when motion is detected by the on-board ...