EG ONE - Set the Unlock Time (Obsolete)

EG ONE - Set the Unlock Time (Obsolete)

The unlock time is configurable from 1 to 100 seconds. The Entraguard unit's unlock time, by default, is set to 1 second.

  1. From the device home screen, swipe left, then press the edit icon.
  2. Locate the unlock time setting, then press the value it is set to (default is 1).
  3. Enter a new door unlock time of between 1 and 100 seconds.
  4. Press OK.

Note: The unlock time is user/app-specific. Therefore if you have multiple remote connections to the same unit, each client can use a different unlock time.

    • Related Articles

    • EG ONE - Set the Time (Obsolete)

      Once you have added the unit you will need to manually set the time. This ensures accurate functionality of features, such as notifications and viewing live video. On the device home screen, swipe left, then press the edit icon. Press the Advanced ...

    • EG ONE Setup and User Guide (Obsolete)

      Standalone document attached.

    • EG ONE - Enable One-Key Unlock (Obsolete)

      The One-Key Unlock feature gives you the less-secure option of unlocking the door immediately following a single press of the unlock icon. By default you are required to enter an unlock password (default is 1111). From the device home screen, swipe ...

    • EG ONE/EG ONE+ Data Sheet (Obsolete)

      Standalone document attached

    • EG ONE/One+ Setup - iOS App (Obsolete)

      Setup Procedure Using an iOS Device 1.0 Introduction The Entraguard ONE is an app-based, VOIP Video doorbell/Intercom system design to secure the entrance of a residential or small, commercial building. The ONE units provide video monitoring of a ...