Borealis Single Active Credential Option

Borealis Single Active Credential Option

1.0 Introduction

Borealis has a system wide setting that allows you to enforce just one single active credential for all cardholders across your entire system. This will ensure that all cardholders only have one active credential at any given time.

NotesNote: To enable this feature all cardholders in the system must already be assigned just one active credential.

2.0 Enable Single Active Credentials

  1. From the Borealis user interface click on the System Settings menu option.



  2. The System Settings screen will appear.
  3. At the top of the screen in the Cardholder Settings set One Active Credential per Cardholder to Enable.
  4. Click on the SAVE button.

    You will see a notification at the top of the screen if there are credentials which are already assigned more than one active credential. If so these cardholder records will need to be edited so that each cardholder only has one active credential. You will then be able to save and activate this option. From then on cardholder will only be able to have one active credential.

    • Related Articles

    • Borealis - Credential Formats

      1.0 Introduction Borealis includes support for multiple credential formats including: Keri NXT Keri MS RAW Cardnumber 26-Bit Wiegand 10301 37-Bit Wiegand 10304 MIFARE 32-Bit MIFARE 56-Bit Generic 26, 32, 33, 34, 35, 36, 37, 44, 48, 56 (full card ...

    • Borealis FAQs

      1.0 Borealis General Questions What is Borealis? Borealis is Keri Systems’ cloud-based access control system. Borealis gives you complete visibility and control of your system from any computer, tablet or mobile device that has a web browser and an ...

    • Borealis - Feature Release Notes

      Feature Release Date Description Simulate Credentials August 2025 The Simulate Credentials feature is supported on NXT-MSC and Mercury controllers. This feature, once enabled for an operator, will allow the operator to simulate a credential ...

    • Borealis - Block Enrollment

      1.0 Introduction The Block Enroll feature allows you to enroll a sequentially numbered block of credentials via the Credentials screen. It requires you to know the credential imprint numbers and the programmed facility code (where applicable). Not ...

    • Borealis Full Setup Guide

      1.0 Introduction This document aims to guide you step-by-step through setting up a new Borealis system. The steps are in sequential order and begin with registering a new Borealis account and conclude with viewing live events (such as access granted ...