Temp Unlock

Temp Unlock


The Temp Unlock feature allows you to unlock a door or multiple doors from the client workstation.

 

Temp Unlock can be performed via one of the following methods:

 

From the Hardware Tree

  • Go to the hardware tree (Setup >> Hardware Setup >> All).
  • Highlight a reader from the hardware tree.
  • Click the Temp Unlock icon from the Selected Hardware ribbon bar.

 

Temp Unlock - Image 1

 

  • This will temporarily unlock the door for the strike time that is set for the reader.

 

Temp Unlock 2

 

  • You can however perform a Temp Unlock for a duration greater than the default unlock time. For example if a delivery is being made, if a large group of people are entering perhaps for some kind of special event.
  • From the drop-down list to the right of the Temp Unlock icon select one of the available options. Then click the Temp Unlock icon again.

    Note: the available temporary unlock times vary depending on which hardware type you are using.

  • You can also right-click the reader in the hardware tree (but this will always be for the unlock/strike time).

 

Temp Unlock - Image 3

 

 

From the Doors Tab

  • Go to Setup >> Hardware Setup >> Doors.
  • Highlight a door or use the SHIFT key on the keyboard to highlight multiple doors.
  • Click the Temp Unlock icon in the ribbon bar or use the right-click and Temp Unlock option to unlock the doors for the door's unlock/strike time.
  • Or you the time selection drop-down list to unlock or the doors for a greater period of time.

 

Temp Unlock - Image 4

 

 

From Live Events

If a reader related event appears in live events, such as door forced or access denied, the system operator can perform a temp unlock on that door. An example might be if the operator has visually verified the identity of someone who has perhaps lost their card or who has accidentally been assigned incorrect access rights.

 

  • Right-click on the reader related event.
  • Select the Temp Unlock option.

 

Temp Unlock - Image 5



    • Related Articles

    • Lock and Unlock Doors

      1.0 Introduction Any doors on the system can be manually locked and unlocked from the software via one of three locations: On the hardware tree (via a right-click), the doors status grid (via a right click), or selecting the reader and then clicking ...
    • Global Unlock - Software

      1.0 Introduction This section explains how to use the built-in Global Unlock feature via icons located on the home tab, allowing you to immediately unlock all doors or a designated group of doors, over multiple controllers and even over different ...
    • Global Unlock - Hardware

      1.0 Introduction Included in Doors.NET is the ability to perform a Global Unlock of all doors on the system from an input on the system, designated as a Global Unlock input. This input cannot be programmed for any door function; such as ...
    • Global Unlock - Card Driven

      Using the Global Linkage module to Activate Global Unlock using a Card 1.0 Introduction This section explains how to use the Global Linkage Automation module to configure a card dedicated to the purpose of performing a Global Unlock. You can have a ...
    • Auto-Unlock Time Schedules

      1.0 Introduction Auto Unlock Time Schedules are used to automatically open and then close doors at certain times of day (they are assigned to doors as Auto Unlock Schedules). An auto unlock schedule may have one interval consisting of a single start ...