EG ONE/EG ONE+ Data Sheet (Obsolete)

 Standalone document attached

• Related Articles

• EG ONE Setup and User Guide (Obsolete)

  Standalone document attached.

• EG ONE/ONE+ Important Installation Guidelines (Obsolete)

  To avoid any potential setup issues, Keri strongly recommends the following checks (prior to setup): Ensure 'Smart Switch' is off (Samsung Android devices) - it can be switched back on once setup is complete. Ensure mobile data 3G/4G is off (all ...

• EG ONE - Enable One-Key Unlock (Obsolete)

  The One-Key Unlock feature gives you the less-secure option of unlocking the door immediately following a single press of the unlock icon. By default you are required to enter an unlock password (default is 1111). From the device home screen, swipe ...

• EG ONE/One+ Setup - iOS App (Obsolete)

  Setup Procedure Using an iOS Device 1.0 Introduction The Entraguard ONE is an app-based, VOIP Video doorbell/Intercom system design to secure the entrance of a residential or small, commercial building. The ONE units provide video monitoring of a ...

• EG ONE/ONE+ Factory Reset (Obsolete)

  Here is the procedure for completely resetting the Entraguard ONE/ONE+ to its factory default settings. Power-off the Entraguard unit. Hold down the call button. Apply power, while holding down the button. Continue to hold down the call button for at ...