What is the WI Plus Module?
A. The NXT-WI Plus module supersedes the NXT-WI module.
As is true with the NXT-WI module, it can only be configured for Wiegand output but you can change the LED mode (single-line or dual line LED mode) using the SW switches on the module.
It can be distinguished from the NXT-RM3 module by its red SW switches. On the NXT-RM3 module these switches are white.
Related Articles
NXT WI Plus Data Sheet
NXT WI+ Data Sheet (attached)
NXT RIM-WI-PLUS Module Installation Guide
1.0 Introduction This guide explains how to install and configure the NXT Wiegand-Only Plus Reader Interface Module which is a permanent replacement for the WI (Wiegand-Only) module. The module connects directly onto one of the communication buses of ...
NXT-RM3 Module - Installation Guide
1.0 Wiring and Layout Diagrams 1.1 Reader Interface Module (RIM) Diagram Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide ...
NXT-RM3 v2 Module - Installation Guide
1.0 Introduction The special purpose NXT RM3 v2 is designed for use without an NXT or NXT-MSC controller and its main function is to pass-through 64-bit NXT credential data to a third-party controller. The RM3 v2 module connects directly onto an NXT ...
Do you have a wiring diagram for the RM3 module?
Here is a wiring diagram for the NXT RM3 Reader Interface Module: Reader Wiring