Borealis | Hubs | Knowledge Base

Hubs
Add a Hub
1.0 Introduction A hub provides the communication link between the Borealis Cloud services and the field hardware (controller, readers and modules). Notes: - At least one hub is required per system. - Multiple hubs of the same controller type can be ...
Setup a Hub
A Borealis hub acts as the communication bridge between the access control hardware and cloud servers. IMPORTANT NOTES: - The hub MUST be added to a DHCP-enabled network with an active internet connection. The Borealis hub requires a DHCP-assigned IP ...

Popular Articles
Generic Database Import (Excel Spreadsheet)
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Cardholder Enrollment - Manual Enrollment
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
Using the pcProxConfig Software
From the Windows start menu, go to All Apps >> RF Ideas >> pcProxConfig.exe The user interface will appear as below. Plug the pcProx Plus USB enrollment reader into an available USB port. The reader will beep once and its LED will be red. Verify ...
PXL-500 Controller Data Sheet
PXL-500 Controller Data Sheet (attached)
NXT 2D/4D Controller Factory Reset
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...

Hubs