Dormakaba Integration

Dormakaba Integration
dormakaba Configuration and Options
1.0 Introduction When using the dormakaba hardware, there are certain factors that have to be configured to provide correct interoperability with existing hardware. For example; if the site uses Mercury hardware then you will have to use the ...
dormakaba - Using the Correct Antenna Type
Omni-Directional and Directional Antenna Types Wi-Q Gateways and Controllers support two antenna types; omni-directional and directional. Omni-directional antennas provide coverage in all directions (but over a shorter distance), whereas directional ...
dormakaba Wi-Q Gateway Site Survey
1.0 Introduction The Wi-Q gateway has a built-in survey mode feature that allows you to conduct an on-site survey of the wireless communication between Gateways and the Wi-Q controllers without requiring third-party software. It is important to ...
dormakaba Lock Integration Setup Guide
1.0 Introduction From Doors.NET v5.1.0 you can integrate with the dormakaba Wi-Q wireless technology access control products (when using Mercury's LP4502 controller). dormakaba Network Drawing The integration provides seamless connectivity with the ...

Popular Articles
Generic Database Import (Excel Spreadsheet)
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Cardholder Enrollment - Manual Enrollment
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
Using the pcProxConfig Software
From the Windows start menu, go to All Apps >> RF Ideas >> pcProxConfig.exe The user interface will appear as below. Plug the pcProx Plus USB enrollment reader into an available USB port. The reader will beep once and its LED will be red. Verify ...
PXL-500 Controller Data Sheet
PXL-500 Controller Data Sheet (attached)
NXT 2D/4D Controller Factory Reset
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...

Dormakaba Integration | Knowledge Base