Entraguard | Specifications

Specifications
Entraguard Silver Walk-up Package Specifications
Specifications: • Capacity: Up to 750 Tenants • Outputs: Door Relay, Alarm Relay, 2 additional programmable relays • Operating Temperature: +5º to 140º F (-15º to 60º C) with heater: -20º to 140º F (-29º to 60º C) • Input Power: 12 VDC @ 1 A • ...
Entraguard Platinum Specifications
Specifications: • Capacity: Up to 5,000 Tenants • Outputs: Door Relay, Alarm Relay, 2 additional programmable relays • Operating Temperature: +5º to 140º F (-15º to 60º C) with heater: -20º to 140º F (-29º to 60º C) • Input Power: 12 VDC @ 1 A • ...
Entraguard Silver Specifications
Specifications: • Capacity: Up to 750 Tenants • Outputs: Door Relay, Alarm Relay, 2 additional programmable relays • Operating Temperature: +5º to 140º F (-15º to 60º C) with heater: -20º to 140º F (-29º to 60º C) • Input Power: 12 VDC @ 1 A • ...
Entraguard Titanium Specifications
Specifications: • Capacity: Up to 250 Tenants • Outputs: Door Relay, Alarm Relay, 2 additional programmable relays • Operating Temperature: +5º to 140º F (-15º to 60º C) with heater: -20º to 140º F (-29º to 60º C) • Input Power: 12 VDC @ 1 A • ...

Popular Articles
Generic Database Import (Excel Spreadsheet)
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Cardholder Enrollment - Manual Enrollment
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
Using the pcProxConfig Software
From the Windows start menu, go to All Apps >> RF Ideas >> pcProxConfig.exe The user interface will appear as below. Plug the pcProx Plus USB enrollment reader into an available USB port. The reader will beep once and its LED will be red. Verify ...
PXL-500 Controller Data Sheet
PXL-500 Controller Data Sheet (attached)
NXT 2D/4D Controller Factory Reset
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...

Entraguard | Specifications | Knowledge Base