Installation/Setup Guides - Series 3 (LP) Hardware
MR62E Controller Installation Guide
MR62E (S3) Controller Installation Guide and Specifications (Attached)
Mercury Security Firmware Vulnerability
Notice Regarding Mercury Security Firmware Vulnerability Jun 22, 2022 Mercury Security has been informed of a firmware security issue affecting the following hardware: LP1501, LP1502, LP2500, LP4502, and EP4502. This issue makes it possible for a ...
LP1501- (S3) Controller Setup Guide
1.0 Introduction This section explains how to setup and configure an LP1501 controller with the Doors.NET software. All LP controllers are pre-configured for use on a network, therefore additional TCP/IP configuration must take place in the field ...
LP1502- (S3) Controller Setup Guide
1.0 Introduction The LP1502 controller is Mercury's next-generation advanced access control platform. They have direct hardware support for 2 openings and can scale to 64 access points. The LP4502 provide a two-door interface with auxiliary I/O, ...
LP4502- (S3) Controller Setup Guide
1.0 Introduction The setup for the LP4502 controller is very similar to the LP1502 and the LP2500. All LP controllers are pre-configured for use on a network, therefore additional TCP/IP configuration must take place in the field prior to placing ...
LP4502- (S3) Controller Installation Guide
LP4502- (S3) Controller Installation Guide and Specifications (Attached)
LP Controller - Full Controller Configuration
LP Series Full Setup and Configuration Guide 1.0 Introduction This section explains how to setup and configure all controller settings and advanced options. All these settings can be found either by logging into the controller via a web browser or by ...
MR16-OUT - Output Control Module Setup
1.0 Introduction The multi-device MR16OUT interface panel is dedicated to point control and monitoring, providing 16 general-purpose outputs as Form C relay contacts. The MR16OUT also provides individually configurable parameters that can be set for ...
MR16IN - Input Control Module Setup
SCP-MR16IN-S3 (Input Control Module) Setup The Input Control Module (MR16IN-S3) processor provides sensor interface and output controls for security/ access control and other applications. The controller has 16 input channels for supervised contact ...
LP1502- (S3) Controller Installation Guide
LP1502 (S3) Controller Installation Guide and Specifications (Attached)
LP1501- (S3) Controller Installation Guide
LP1501 (S3) Controller Installation Guide and Specifications (Attached)