1.0 Introduction Due to a change in US Federal law governing the beginning and ending dates for Daylight Saving Time, the firmware on PXL-250s (v6.3.61), PXL-500s/PXL-510s (v8.4.47), and EntraGuards (Gold/Silver/Titanium v7.3.17 and Platinum v9.0.3) ...
1.0 Introduction The license code is a unique number based on a computer’s hardware ID number. It is not transferable to other computers. Each computer that will be printing badges will need to have its own Badging license code. Badging is a ...
1.0 Presentation Enrollment Presentation Enrollment allows you to use the first reader on the controller network to automatically detect the card information. This method is best used when there are only a few cards to enroll or when the cards are ...
Quite simply, all the Doors32 database information is held in a single folder which, for a typical installation (of the latest version), can be found at the following location: C:\Kerisys\Doors_v5.42\DB This is the only file you will need to restore ...
Transfer the Doors32 System to a New PC The following steps detail the quickest and easiest method for transferring a Doors32 system to a different PC. Note: Doors32 is not compatible with and version of Windows after Windows 7. Also note; if ...
With the advent of Windows 10 and the non-support of Windows XP by Microsoft, we strongly advocate upgrading your system to from Doors32 to Doors.NET. Keri Systems has breathed new life into legacy PXL-500 and Entraguard Telephone Entry systems; ...
Doors32 Installation on Windows 7 or Vista Under the Vista operating system, when the Doors32 Installation program is run from the Doors32 CD / AutoRun menu the following fault message appears, “Unknown Windows Version. Aborting Installation.” ...
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...
From the Windows start menu, go to All Apps >> RF Ideas >> pcProxConfig.exe The user interface will appear as below. Plug the pcProx Plus USB enrollment reader into an available USB port. The reader will beep once and its LED will be red. Verify ...
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...