USB Enrollment Reader Enrollment 1.0 Introduction Keri Part Number - RDR-ENR1 The ENR-1 is a simple and efficient USB enrollment reader . It has a small form factor and is capable of reading a multitude of 125KHz proximity cards and 13.56MHz ...
1.0 Purpose Keri controllers are designed with built-in voltage transient suppression. The controller ship kit also provides external transorbs that Keri highly recommends installing. For most applications, this level of protection is more than ...
1.0 IntroductionThe Alarm Relay Board (ARB) is used to provide external annunciation of controller enclosure and peripheral enclosure tamper events; either an opened enclosure cover or for an enclosure that has been removed from its mounting location ...
1.0 Introduction Doors.NET comes with a generic import utility that can be used to import card data from an Excel (XLS or XLSX) spreadsheet. This is not a licensed feature so it can be used free-of-charge with Doors.NET. 2.0 Configure the Import ...
Keri recommends resetting NXT controllers the first time these controllers are powered on. Also, under certain circumstances NXT controllers may need to be reset. Note: Factory resetting a standard NXT controller will restore the controller to a ...
Manual Enrollment in Doors.NET NXT, MS and 26-bit Wiegand credentials can be manually enrolled by entering the card's imprint (the number printed on the outside of the card), MS and Wiegand cards also require a facility code. The manual enrollment ...