Installation and Setup
Visual Doors - Full Reference
Visual Doors - Full Reference Guide - P/N: 01691-001 - Rev B (attached)
Assign Holidays in Visual Doors
Holiday Assignment Once Holidays have been setup, they can be assigned to Time Schedules. For example, you may have a schedule that automatically unlocks certain doors during the day. When you enable 'Type 1' holidays (HT1) on that schedule, any ...
Setup Holidays in Visual Doors
Create a New Holiday Click on the Holidays tile located on the home screen. Click the Add icon. Give the Holiday a new name. Set the holiday to being enabled. Set the type for the holiday (default is Type 1) - If you want all your holidays to make ...
Setup Time Schedules in Visual Doors
Time schedules are assigned to access groups to determine the hours in which cardholders are able to gain access. They are also used in Auto Unlock Schedules (AUL). AUL schedules are assigned to doors to determine when the door should automatically ...
Access Group Assignment in Visual Doors
Assign an Access Group to a Cardholder From the home screen, click the Cardholders tile. You will see all the cardholders listed on the left. Select a cardholder you wish to edit. The cardholder record will appear on the right. Locate and click on ...
Access Group Setup in Visual Doors
Create a New Access Group From the home screen, click on the Access Groups tile. Existing access groups will be listed on the left. Click the Add icon. Select New Access Group (at the bottom of the list). Enter a description for the new group. ...
Controller Settings in Visual Doors
Controller Settings PXL Controller Settings Description - Enter a description for the controller, for example, where the controller is located within the facility. Enabled - Allows to you quickly toggle between enabling and disabling the controller. ...
Door/Reader Settings in Visual Doors
Door/Reader Setup Note: Not all the reader settings listed below are available for every controller type. Reader Description Add a description for the door to identify its location. Enable/Disable the Reader Allows you to quickly toggle between the ...
NXT-MSC Controller Setup in Visual Doors
NXT-MSC Controller Setup Manually Add NXT-MSC Controllers NXT Mercury-Powered (MSC) controllers are typically added to the system using the Scan feature. However, there are some rare situations where the controller will have already been programmed ...
NXT Controller Setup in Visual Doors
NXT Controller Setup Manually Add NXT Controllers NXT controllers are typically added to the system using Auto Config. However, there are some rare situations where the controller will have already been programmed with its IP address and simply needs ...
Entraguard Controller Configuration in Visual Doors
Entraguard Settings Once the Entraguard is online it can be configured on the Hardware Setup screen. Description - Enter a description for the Entraguard controller, for example, where the controller is located within the facility. Communication ...
Entraguard Controller Setup in Visual Doors
Entraguard Setup 1.0 Introduction Visual Doors supports the Entraguard, Silver and Titanium Telephone Entry controllers functioning as a node on a PXL-500 network for seamless integration with a PXL system. The Entraguard can work as a single unit or ...
PXL-500 Controller Setup in Visual Doors
PXL-500 Controller Setup 1.0 Manually Add PXL Controllers When manually adding PXL controllers there are three available communication methods: Serial, Modem or TCP/IP. Visual Doors supports a mixture of multiple Primary PXL controllers - each using ...